COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 12:46:40 2022
CMDLINE : horcctl -S
*********** SYSTEM ERROR ***********
P.P.   : RAID Manager for WindowsNT/x64
Model  : RAID-Manager/WindowsNT/x64
Ver&Rev: 01-65-03/05
Release: Production(GA)

   Host: XLAB12-07
EUserId: Administrator (0)
Process: 15728

[System Call Error]
SysCall: CreateFile
LastErr: 2 (The system cannot find the file specified.

)
ErrInfo: Internal Error
ErrTime: Tue Jul 19 12:46:40 2022
SrcFile: shorcmc.c
SrcLine: 1241

12:46:40-4f588-00015728- 15728:HORCM death detected or access is denied.
12:46:43-1f7e8-00015728- ERROR:cm_open[scmclcon() timeout_err]
12:46:43-1f7e8-00015728- ERROR:horcm_lep_create
12:46:43-1f7e8-00015728- [horcctl][exit(251)]
[EX_ATTHOR] Can't be attached to HORC manager
[Cause ]:Couldn't connect with the HORC manager.
[Action]:Please check if HORC manager is running or if HORCMINST is set correctly.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 19:47:53 2022
CMDLINE : raidcom.exe -login username ***** raid-maintenance -I0
19:47:55-06978-00014932- usr auth: hdl:d2 inc:f3 result:219:47:55-06978-00014932- User authentication has failed(stat = 2) on Serial#(356017).
19:47:55-06978-00014932- [raidcom][exit(202)]
[EX_ENAUTH] Authentication failed with User
[Cause ]:Authentication for using the RAID has failed with User name or Password.
[Action]:Please confirm if User name or Password are correct, or confirm expiration date.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 19:53:39 2022
CMDLINE : raidcom.exe -a qry -o ldev -gldevlist ldev -pname undefldev -fx -I0
19:53:42-d8108-00008356- Received signal(SIG=2)
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 20:02:40 2022
CMDLINE : raidcom.exe -a reg -o ldev -psupportautoldev on -pldev 0x0010 -psize 100m -prgrp R_1-4 -I0
20:02:40-31510-00009016- [raidcom][exit(253)]
[EX_INVARG] Invalid argument
[Cause ]:An option or arguments of an option are incorrect.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 20:03:11 2022
CMDLINE : raidcom.exe -a reg -o ldev -psupportautoldev on -pldev 10 -psize 100m -prgrp R_1-4 -I0
20:03:11-ad958-00008932- [raidcom][exit(253)]
[EX_INVARG] Invalid argument
[Cause ]:An option or arguments of an option are incorrect.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 20:05:32 2022
CMDLINE : raidcom.exe -a reg -o ldev -psupportautoldev on -pldev 0x0010 -psize 100m -prgrp 1-4 -I0
20:05:32-c96a8-00009072- ERROR:cm_sndrcv[rc < 0 from HORCM]
20:05:32-c96a8-00009072- [raidcom] L_CMD(SET_CLI_PARAM/LDEVPROV/REG) ERROR :rc = -35
20:05:32-c96a8-00009072- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 20:54:56 2022
CMDLINE : raidcom.exe -a qry -o ldev -gldevlist ldev -pname undefldev -fx -I0
20:55:03-42298-00008620- Received signal(SIG=2)
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Tue Jul 19 20:57:18 2022
CMDLINE : raidcom.exe -a reg -o ldev -psupportautoldev on -pldev 0x0010 -psize 100 -ppid Pool0 -I0
20:57:18-c0a08-00014816- ERROR:cm_sndrcv[rc < 0 from HORCM]
20:57:18-c0a08-00014816- [raidcom] L_CMD(SET_CLI_PARAM/LDEVPROV/REG) ERROR :rc = -35
20:57:18-c0a08-00014816- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 04:58:54 2022
CMDLINE : raidcom.exe -a reg -o lun -psupportautolun on -plun 0 -pldev 0x0010 -pport CL2-A-1 -I0
04:58:54-591c8-00013488- ERROR:cm_sndrcv[rc < 0 from HORCM]
04:58:54-595b0-00013488- [raidcom] L_CMD(SET_LUN_HST) ERROR :rc = -35
04:58:54-595b0-00013488- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 05:01:03 2022
CMDLINE : raidcom.exe -a reg -o lun -psupportautolun on -plun 0 -pldev 0x0010 -pport CL2-A-1 -I0
05:01:03-c2560-00012124- ERROR:cm_sndrcv[rc < 0 from HORCM]
05:01:03-c2560-00012124- [raidcom] L_CMD(SET_LUN_HST) ERROR :rc = -35
05:01:03-c2560-00012124- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 05:02:40 2022
CMDLINE : raidcom.exe -a reg -o lun -psupportautolun on -pldev 0x0010 -pport CL2-A-1 -I0
05:02:40-c6bb0-00011548- ERROR:cm_sndrcv[rc < 0 from HORCM]
05:02:40-c6bb0-00011548- [raidcom] L_CMD(SET_LUN_HST) ERROR :rc = -35
05:02:40-c6bb0-00011548- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:15:33 2022
CMDLINE : raidcom.exe -a reg -o egrp -ppthg 1 -pegrp 1-1 -pport CL2-B -pwwn 50060e8012b06e14 -plun 0 -I0
17:15:33-dcb40-00011216- ERROR:cm_sndrcv[rc < 0 from HORCM]
17:15:33-dcf28-00011216- [raidcom] L_CMD(SET_CLI_PARAM/ELDEVPROV/REG/REGVOL) ERROR :rc = -35
17:15:33-e0da8-00011216- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:44:59 2022
CMDLINE : raidcom.exe -a conn -o egrp -I0
17:44:59-c63e0-00014888- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:46:09 2022
CMDLINE : raidcom.exe -a conn -o egrp -pegrp 1-2 -I0
17:46:09-ce8b0-00009404- ERROR:cm_sndrcv[rc < 0 from HORCM]
17:46:09-cec98-00009404- [raidcom] L_CMD(SET_CLI_PARAM/ELDEVPROV/SET/RSTRVOL) ERROR :rc = -35
17:46:09-cec98-00009404- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:46:26 2022
CMDLINE : raidcom.exe -a conn -o egrp -plun 0 -I0
17:46:26-e8e90-00009500- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:46:43 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 14 -I0
17:46:43-b4aa0-00013180- [raidcom][exit(205)]
[EX_ENOOBJ] No such Object in the RAID
[Cause ]:The object which was designated with the option doesn't exist in RAID.
[Action]:Please confirm if the object exists in RAID, or appropriate object is specified by using 'raidcfg -a qry -o ...' command.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:48:09 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 5040B06E0014 -I0
17:48:09-26930-00009504- [raidcom][exit(253)]
[EX_INVARG] Invalid argument
[Cause ]:An option or arguments of an option are incorrect.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:48:39 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 0x0014 -I0
17:48:39-bb800-00014756- [raidcom][exit(205)]
[EX_ENOOBJ] No such Object in the RAID
[Cause ]:The object which was designated with the option doesn't exist in RAID.
[Action]:Please confirm if the object exists in RAID, or appropriate object is specified by using 'raidcfg -a qry -o ...' command.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:48:50 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 0x1400 -I0
17:48:51-11558-00014920- [raidcom][exit(205)]
[EX_ENOOBJ] No such Object in the RAID
[Cause ]:The object which was designated with the option doesn't exist in RAID.
[Action]:Please confirm if the object exists in RAID, or appropriate object is specified by using 'raidcfg -a qry -o ...' command.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:49:08 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 0x1400 -fx -I0
17:49:08-84d00-00010940- [raidcom][exit(205)]
[EX_ENOOBJ] No such Object in the RAID
[Cause ]:The object which was designated with the option doesn't exist in RAID.
[Action]:Please confirm if the object exists in RAID, or appropriate object is specified by using 'raidcfg -a qry -o ...' command.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:49:19 2022
CMDLINE : raidcom.exe -a conn -o egrp -pldev 0x0014 -fx -I0
17:49:19-d4a58-00014588- [raidcom][exit(205)]
[EX_ENOOBJ] No such Object in the RAID
[Cause ]:The object which was designated with the option doesn't exist in RAID.
[Action]:Please confirm if the object exists in RAID, or appropriate object is specified by using 'raidcfg -a qry -o ...' command.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:57:27 2022
CMDLINE : raidcom.exe -a set -o rcu -pcuf 350424 -I0
17:57:27-84530-00015348- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:57:41 2022
CMDLINE : raidcom.exe -a set -o rcu -pcuf 350424 R800 -I0
17:57:41-a2d78-00010892- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:57:58 2022
CMDLINE : raidcom.exe -a set -o rcu -pcuf 350424 R800 0 -I0
17:57:59-06590-00015168- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 17:59:10 2022
CMDLINE : raidcom.exe -a set -o rcu -pcuf 350424 R800 0 -pmport CL5-A -prport CL7-A -I0
17:59:10-4d260-00014520- [raidcom][exit(254)]
[EX_REQARG] Required Arg list
[Cause ]:An option or arguments of an option are not sufficient.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 18:03:54 2022
CMDLINE : raidcom.exe -a set -o rcu -pcuf 350424 R800 0 -prcuopt 1 15 1 -I0
18:03:55-1c138-00000636- ERROR:cm_sndrcv[rc < 0 from HORCM]
18:03:55-1c138-00000636- [raidcom] L_CMD(SET_CLI_PARAM/RCUPATH/SET/REMOTEDKC) ERROR :rc = -35
18:03:55-1c138-00000636- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 18:12:27 2022
CMDLINE : raidcom.exe -a del -o rcu -pcuf 356017 R800 0 -I0
18:12:27-cc588-00011116- ERROR:cm_sndrcv[rc < 0 from HORCM]
18:12:27-cc588-00011116- [raidcom] L_CMD(SET_CLI_PARAM/RCUPATH/DEL/REMOTEDKC) ERROR :rc = -35
18:12:27-cc588-00011116- [raidcom][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log0\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Wed Jul 20 19:08:51 2022
CMDLINE : raidcom.exe -a qry -o ldev -gldevlist ldev -pname undefldev -fx -I0
19:09:11-3b920-00007204- Received signal(SIG=2)
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 10:12:51 2022
CMDLINE : raidcom.exe -a qry -o ldev -pldev undefined -fx -I0
10:12:51-9d3a0-00014388- [raidcom][exit(253)]
[EX_INVARG] Invalid argument
[Cause ]:An option or arguments of an option are incorrect.
[Action]:Please designate the correct option using the -h option.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 10:13:20 2022
CMDLINE : raidcom.exe -a qry -o ldev -gldevlist ldev -pname undefldev -fx -I0
10:13:42-802c8-00014696- Received signal(SIG=2)
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 11:55:26 2022
CMDLINE : paircreate -g oraHA -f never -vl -jq 0 -I0
11:56:26-28488-00007444- ERROR:cm_sndrcv[rc < 0 from HORCM]
11:56:26-28870-00007444- [paircreate] R_RDCFG ERROR :rc = -14
11:56:26-28870-00007444- grpname=oraHA devname=dev1
11:56:26-2a7b0-00007444- [paircreate][exit(242)]
[EX_ENORMT] No remote host alive for remote commands or Remote Raid Manager might be blocked (sleeping) on an existing I/O.
[Cause ]:A time out occured on remote communication,and HORC manager failed to re-execute.
[Action]:Please confirm if the HORC manager in the remote host is running,and then increase the value of the time out in the configuration file.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 11:57:13 2022
CMDLINE : paircreate -g oraHA -f never -vl -jq 0 -I0
11:58:13-7d3e8-00000072- ERROR:cm_sndrcv[rc < 0 from HORCM]
11:58:13-7d7d0-00000072- [paircreate] R_RDCFG ERROR :rc = -14
11:58:13-7d7d0-00000072- grpname=oraHA devname=dev1
11:58:13-7d7d0-00000072- [paircreate][exit(242)]
[EX_ENORMT] No remote host alive for remote commands or Remote Raid Manager might be blocked (sleeping) on an existing I/O.
[Cause ]:A time out occured on remote communication,and HORC manager failed to re-execute.
[Action]:Please confirm if the HORC manager in the remote host is running,and then increase the value of the time out in the configuration file.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 12:21:10 2022
CMDLINE : paircreate -g oraHA -f never -vl -jq 0 -I0
12:22:10-5fb40-00012436- ERROR:cm_sndrcv[rc < 0 from HORCM]
12:22:10-5ff28-00012436- [paircreate] R_RDCFG ERROR :rc = -14
12:22:10-5ff28-00012436- grpname=oraHA devname=dev1
12:22:10-5ff28-00012436- [paircreate][exit(242)]
[EX_ENORMT] No remote host alive for remote commands or Remote Raid Manager might be blocked (sleeping) on an existing I/O.
[Cause ]:A time out occured on remote communication,and HORC manager failed to re-execute.
[Action]:Please confirm if the HORC manager in the remote host is running,and then increase the value of the time out in the configuration file.
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 12:28:56 2022
CMDLINE : paircreate -g oraHA -f never -vl -jq 0 -I0
12:29:06-c2560-00011300- Received signal(SIG=2)
COMMAND ERROR  : EUserId for HORC[0] : Administrator (0)  Thu Jul 21 12:29:57 2022
CMDLINE : paircreate -g oraHA -f never -vl -jq 0 -I0
12:39:57-dc758-00009372- ERROR:cm_sndrcv[rc < 0 from HORCM]
12:39:57-dcb40-00009372- [paircreate] R_RDCFG ERROR :rc = -14
12:39:57-dcb40-00009372- grpname=oraHA devname=dev1
12:39:57-dcb40-00009372- [paircreate][exit(242)]
[EX_ENORMT] No remote host alive for remote commands or Remote Raid Manager might be blocked (sleeping) on an existing I/O.
[Cause ]:A time out occured on remote communication,and HORC manager failed to re-execute.
[Action]:Please confirm if the HORC manager in the remote host is running,and then increase the value of the time out in the configuration file.