Software Defined Storage​

 View Only

 Hello,We are working to migrate data from VSP (old) to a VSP G700 using Nondisruptive Migration by CLI (Because is not supported under HCS). Could someone suggest formal or informal documentation to perform this migtration?Thanks in advance.

  • Flash Storage
  • Hitachi Virtual Storage Platform VSP
  • Storage as a Service
  • Storage as a Service SaaS
Javier Castro's profile image
Javier Castro posted 09-28-2020 14:57

#StorageasaServiceSaaS
#HitachiVirtualStoragePlatformVSP
William Jansen Van Nieuwenhuizen's profile image
William Jansen Van Nieuwenhuizen posted 09-30-2020 08:21

Hello Javier

 

Below you can find the interoperability matrix on NDM:

https://support.hitachivantara.com/en/answers/interoperability.html

 

The current NDM support matrix is here:

https://support.hitachivantara.com/content/dam/hds/PDFs/interop/VSP%205X00,%20G1x00,%20F1500,%20E990,%20Gxx0,%20Fxx0,%20VSP%20HUS%20VM%20NonDisruptive%20Migration(NDM)_support_matrix_042120.pdf

 

I would suggest Hitachi Ops Center Suite. Using either Protector doing it manually or leaveraging our NDM automations in Automator to assist with the migration.

Brent Lund's profile image
Brent Lund posted 01-13-2021 19:25

I assume you know that you can do a single reboot migration by externalizing the old volume? I realize it's not what you are asking for, however assuming the application can take an outage the duration of a reboot it is an EZ migration. The actual migration of the data and final cutover is seamless to the host.

Related Content