• Migration WWN not seen

    On Hitachi Compute Blade CB500, we are trying to coinfigure LPAR with Migration WWPN. But it is not getting visible to to the SAN switch. So can't do zoning.  How to publish them. Anyone has faced such issue....
    Sudhir Bisht
    created by Sudhir Bisht
  • Lpar virtual wwn in hitachi cb2500

    Hi all,   I just setup lpar environment in hitachi cb2500. I created lpar, and assign it virtual wwn (let's say wwn for lpar xx:xx:xx:xx:xx:xx:70:02) while I tried to zoning on fabric switch, I didn't see lpar...
    Wesley Wesley
    last modified by Wesley Wesley
  • Driver and Firmware upgrade on Blade and CR server

    Hi Team,   Can anyone let me know the driver and firmware upgrade procedure for the blade server,  is there any exe file which can run from the server and get updated all the latest drivers and firmware. &#...
    Ajeesh Mathottam
    last modified by Ajeesh Mathottam
  • Back to the Future – No Time Like the Present for Management & Orchestration

    The eighties left in its wake, countless fashion victims.  Admittedly I was among them. I survived the fashion brutalities of permed hair, parachute pants and fingerless gloves. It was impossible, through the bli...
    Monique Lucey
    created by Monique Lucey
  • CB500 visio stencils

    Hi,   Is there somewhere some visio stencils for the CB500 ?
    Team Infrastructure
    last modified by Team Infrastructure
  • Cannot start LP service in Blade 2500 server

    After binding the firmware to the blade server I tried starting the LP service. But after searching for firmware it always fail at     Error: Could not get loader image size from Management Module, error...
    Kesara Weerathunga
    last modified by Kesara Weerathunga
  • Multiple VLAN in onboard NIC CB2500

    Hi all,   I have chassis cb2500 that's installed some lpars. So, in this case I have some lpars with different vlan ( I use a port onboard to generate vnic for every lpar). In DBC I've config trunk port, but lpa...
    Wesley Wesley
    last modified by Wesley Wesley
  • Does LPAR support for OVF/OVA import?

    Does LPAR currently support for OVF/OVA import? or any roadmaps perhaps?
    Wildan Abdat
    created by Wildan Abdat
  • change or delete ceconsl for individual blades in CB2500

    Is it possible to change the default password for ceconsl on individual blade servers in CB2500? The ceconsl user's password was changed for the chassis but this still doesn't change it for the individual blade server...
    Alex Bouttelgier
    created by Alex Bouttelgier
  • login fails to a remote desktop from blade 2500

    When trying to perform a remote connect from the hitachi compute blade 2500 I go to BMC, click on the lower right corner to start a remote connection, the java loads and executes but in the last moment it says login f...
    Alex Bouttelgier
    last modified by Alex Bouttelgier
  • n+m standby for disaster recovery

    Hi All ,   I have an environment which has 2 datcentres , each datacentre with multiple HDS-CB500 chassis  with LPARs hosting windows and LINUX workload. All these hosts are boot from SAN. SAN Replication i...
    last modified by RIBHU DIXIT
  • Reseting SVP on old BladeSymphony 1000

    My old BladeSymphony 1000 doesn't have any users configured on the SVP.  I must have deleted them all preparing to decommission it.  I can get into SVP without authentication, but only get Operator level pri...
    Jiann-Ming Su
    last modified by Jiann-Ming Su
  • Trying to install windows 2008 in a CB500 Lpar.

    Im trying to install windows in a CB500 Lpar. I can boot, see the disks after loading the drivers (they are on a VSP), but cant install windows. Getting error 0x80300001. What should I do?     Many thanks!!
    Vinicius Coelho
    last modified by Vinicius Coelho
  • Sizing Questionnaire/tool for Compute Blade

    Hi Good Morning, just wanna ask if there's any sizing material/tool for compute blade that I can use to scope a client's requirement.   Thank you and have a blessed day ahead.
    Jayvee Hagonoy
    last modified by Jayvee Hagonoy
  • Is there any documentation that shows what OS supports Hitachi Compute Blades?

    List of OS that Hitachi Compute Blade Series (2500 and 500) supports..   Thanks.
    Jayvee Hagonoy
    last modified by Jayvee Hagonoy
  • CB2500 Failed Instalation

    Hi All i have CB520X1 it's not use smp and also i want to install operating system into Internal Disk but there is some problem when i finnish instalation, it show like the picture below     is that any...
    Audhie Ardhana
    last modified by Audhie Ardhana
  • Hitachi Compute Blade - Logical Partitioning Capabilities

    In this Product Overview you'll learn about the Logical Partitioning Capabilities on Hitachi Compute Blade. Depending on your requirements, you can choose dedicated or shared mode in multitenant environments to meet y...
    Brett Cavanagh
    last modified by Brett Cavanagh
  • LAN Switch on CB2000

    Hi all,   How am i gonna access the CLI on our CB2000 Blade chassis? Also, is this a Hitachi switch?   Thanks,   Arnold
    Arnold Decal
    last modified by Arnold Decal
  • Mapping Diagram between Server Blade's Mezzaine and IOBD ports from CB2500 Chassis

    Hi Practitioners,   There are 28 PCIe slots for Hitachi Five Fx 16Gbps IO cards and 10GbE Network IO cards on the Rear Side of CB2500 Chassis. In case of 2 x 3TB Scale out SAP HANA Nodes, the chasis have the fo...
    Hyunchol Hwang
    last modified by Hyunchol Hwang
  • Why only 14 CB520H Blade Server can be Installed on the CB2500?

    Q1. Why only 14 CB520H Blade Server can be Installed on the CB2500?        Can be used the last Blade slot 15 as a member of 4-Blade SMP configuration of Secondary Node?   Q2. Ever...
    Hyunchol Hwang
    last modified by Hyunchol Hwang