• Driver and Firmware upgrade on Blade and CR server

    Hi Team,   Can anyone let me know the driver and firmware upgrade procedure for the blade server,  is there any exe file which can run from the server and get updated all the latest drivers and firmware. &#...
    Ajeesh Mathottam
    last modified by Ajeesh Mathottam
  • Networking on server web

    Hello everyone I have a structure consisting of a blade with the CB2000 relevant forms of networking. I configured the vmnic in vmware and associated host 5.1. The goal is to put online a virtual web server accessibl...
    Matteo Primiano
    last modified by Matteo Primiano
  • UCP Series Visio Stencils

    Hi All   Is there somewhere visio stencils for the UCP Series ?   Thank you Hyun
    YoungChul Hyun
    last modified by YoungChul Hyun
  • CB500 visio stencils

    Hi,   Is there somewhere some visio stencils for the CB500 ?
    Team Infrastructure
    last modified by Team Infrastructure
  • Hi-Track in CR220H BMC

    How do I setup Hi-Track monitoring for our CR220H servers which are running vSphere please?   I can see that in the BMC there is a section to enter Hi-Track server IP addresses but I'm not clear if we would spec...
    Paul Hutchings
    last modified by Paul Hutchings
  • how we can size the storage capacity in HCP , if we need in total 15 TB usable capacity. what are the calculation in HCP ?

    i am planning to propose a customer UCP HCI solution from Hitachi V210 , now i wanted to offer 15 TB usable capacity . does it need to be per node OR i must put 15 TB usable for all ?
  • Procedure for adding blades on existing CB500

    Hi, Where can I find the instruction on how to add blades on CB500?
    Russell A Nunag
    last modified by Russell A Nunag
  • Cannot start LP service in Blade 2500 server

    After binding the firmware to the blade server I tried starting the LP service. But after searching for firmware it always fail at     Error: Could not get loader image size from Management Module, error...
    Kesara Weerathunga
    last modified by Kesara Weerathunga
  • Multiple VLAN in onboard NIC CB2500

    Hi all,   I have chassis cb2500 that's installed some lpars. So, in this case I have some lpars with different vlan ( I use a port onboard to generate vnic for every lpar). In DBC I've config trunk port, but lpa...
    Wesley Wesley
    last modified by Wesley Wesley
  • UCP HC V120F(D52B-1U ) Environmental Information

    Hi there,   I want to get the environmental information; Power consumption and heat output(BTU) of UCP HC V120F(D52B-1U). There is no information even QCT homepage. Is there anybody can help me?
    Seung Woo Cho
    last modified by Seung Woo Cho
  • Does LPAR support for OVF/OVA import?

    Does LPAR currently support for OVF/OVA import? or any roadmaps perhaps?
    Wildan Abdat
    created by Wildan Abdat
  • CR220H detailed hardware specifications

    Where can I find detailed description of the PCIe bus specs and layouts of the CR220H server chassis? I need to make sure that I balance LAN and SAN traffic across the PCIe slots. I've found the datasheet an dbasic ...
    b399s2ui
    created by b399s2ui
  • UCP 6000 and SQL

    I've looked for a performance sheet for the UCP and Microsoft SQL but haven't been able to locate one. Does anyone know where I can find one or if it exist? I can't find Oracle all day long so I'm hopping there's one ...
    Eric Hale
    last modified by Eric Hale
  • Lpar virtual wwn in hitachi cb2500

    Hi all,   I just setup lpar environment in hitachi cb2500. I created lpar, and assign it virtual wwn (let's say wwn for lpar xx:xx:xx:xx:xx:xx:70:02) while I tried to zoning on fabric switch, I didn't see lpar...
    Wesley Wesley
    last modified by Wesley Wesley
  • Load CB2500 firmware

    Hi all,   can you help me what should I prepare before I assign firmware to LPAR? I just assign firmware to LPAR, and I have wait too long before I got error firmware can't load   thanks
    Wesley Wesley
    created by Wesley Wesley
  • Firmware AMS 2100

    Hi all, where can I find the list of available firmware?   Thanks.
    A001050C
    last modified by A001050C
  • change or delete ceconsl for individual blades in CB2500

    Is it possible to change the default password for ceconsl on individual blade servers in CB2500? The ceconsl user's password was changed for the chassis but this still doesn't change it for the individual blade server...
    Alex Bouttelgier
    created by Alex Bouttelgier
  • login fails to a remote desktop from blade 2500

    When trying to perform a remote connect from the hitachi compute blade 2500 I go to BMC, click on the lower right corner to start a remote connection, the java loads and executes but in the last moment it says login f...
    Alex Bouttelgier
    last modified by Alex Bouttelgier
  • Scalr Integration

    is Scalr ( Cloud Management) integration is possible with HDS UCP? If yes, share the way to do.
    Ramkumar Muthaiyan
    last modified by Ramkumar Muthaiyan
  • CB 500 LPAR SMP

    HI   In case two blades configured with smp with four cpu in total .. how many lpars can be created on top of that big logical server ?   Thanks
    Thamer Salah
    last modified by Thamer Salah