Profile

Maksym Tatarenko

S&T UKRAINE

Contact Details

S&T UKRAINE

My Content

1 to 12 of 12 total
Posted By Maksym Tatarenko 03-06-2019 07:27
Found In Community: Object Storage​
\ view thread
yes. To add LUNs to additionaly created paths you need use next CLI: # raidcom add lun -port CL1-E-1 -ldev_id 20 -lun_id 20 -additional_port CL2-F # raidcom add lun -port CL1-E-1 -ldev_id 21 -lun_id 21 -additional_port CL2-F CL1-E-1 - you old path CL2-F - you new path
Posted By Maksym Tatarenko 12-10-2018 14:31
Found In Community: Object Storage​
\ view thread
Hi You can add port and WWN to host_grp_name from CCI: # raidcom add host_grp -port CL2-F-1 -host_grp_name HA-ESX-B1-12 -IH1 # raidcom add hba_wwn -port CL2-F-1 -hba_wwn 2002848F6967D718 -IH1
Posted By Maksym Tatarenko 12-10-2018 14:23
Found In Community: Flash Storage​
\ view thread
I had the same situation when physically move  system and remove-insert all HDD. If you insert HDD in wrong position - you will have error disk failed. To solve problem just swap HDDs, i.e. insert HDDs in correct position.
Posted By Maksym Tatarenko 12-07-2018 09:51
Found In Community: Object Storage​
\ view thread
See my example from real formating. fmt - full format # raidcom initialize parity_grp -parity_grp_id 1-1 -operation fmt -IH4 # raidcom initialize parity_grp -parity_grp_id 1-2 -operation fmt -IH4 check # raidcom get ldev -ldev_list defined -IH4 | egrep ^LDEV :|OPE_TYPE|OPE_RATE LDEV : 101 OPE_TYPE : ...
Posted By Maksym Tatarenko 12-04-2018 15:17
Found In Community: Flash Storage​
\ view thread
From MPC I see menu to add NAS module.
Posted By Maksym Tatarenko 12-03-2018 17:00
Found In Community: Flash Storage​
\ view thread
Ok. Thanks. I find doc on TISC.
Posted By Maksym Tatarenko 12-03-2018 16:28
Found In Community: Flash Storage​
\ view thread
Thanks. So should I mandatory use MPC laptop?  Is there any option to update firmware for NAS support from  SVP?
Posted By Maksym Tatarenko 12-03-2018 16:00
Found In Community: Flash Storage​
\ view thread
Hello, I have VSP G600. Now i need to add two NAS modules to both controllers. I installed 2 additional batteries, but I cant see BKMF-10, BKMF-20. And I dont see menu to add NAS module. Any advice? Do I need any licence to see battery and menu? #FlashStorage #HitachiVirtualStoragePlatformVSP
Posted By Maksym Tatarenko 07-17-2018 10:58
Found In Community: Hitachi Content Platform​
\ view thread
Thanks. It was my problem.
Posted By Maksym Tatarenko 07-09-2018 08:48
Found In Community: Hitachi Content Platform​
\ view thread
# /usr/bin/horcmstart.sh 3 starting HORCM inst 3 HORCM inst 3 starts successfully. # raidcom -login maintenance ****pass*** # raidcom lock resource -resource_name meta_resource # raidcom get resource RS_GROUP RGID stat Lock_owner Lock_host Serial# meta_resource 0 Locked maintenance pms1 480223 # raidcom ...
Posted By Maksym Tatarenko 01-15-2018 14:51
Found In Community: Hitachi Content Platform​
\ view thread
Problem was solved. We need to present CMD dev as Physical from ESX.
Posted By Maksym Tatarenko 01-09-2018 07:33
Found In Community: Hitachi Content Platform​
\ view thread
Hello, In documentation Global-Active Device User Guide we can read how to configure GAD using Hitachi Command Suite. But we have no information how to configure Pair Management Servers (PMS) for GAD. Can you share any info how to configure PMS. I have error when try to allocate volume using GAD. The ...