there is on HCS/Analytics a graph on category Ports called " Busy Rate "
I would like to know how find this metric on Tuning Manager ?
hi Marc ,
It seems no single metric called " port busy %" for FE ports in TnM . But you may leverage IOPS and tranfer rate metric to determine that
can you give an example ?
As mentioned by Sushanth there is no direct metric for Port busy Rate in performance reporter.
The way to arrive at the Port busy rate is to use the PI_PTS - Port summary record to get the values of the Avg Xfer /se. And use the formula
( Avg Xfer/sec / actual-port-speed ) x 100
This formula used in HCS is mentioned in the HCS user guide.
thanks a lot
Le 6 sept. 2016 à 19:07, Khalid Akram Shaik <email@example.com<mailto:firstname.lastname@example.org>> a écrit :
Port busy rate
reply from Khalid Akram Shaik<https://community.hitachivantara.com/people/B560K5WN?et=watches.email.thread> in Storage Management - View the full discussion<https://community.hitachivantara.com/message/30515?et=watches.email.thread#comment-30515>
Thanks Khalid for the info
Retrieving data ...