how to check using command or easy way i can check in STN2 but we manage server using HCS /stn2 no cci installed if yes where to install CCI to get teh info for ams 2500
If the AMS is in a unconfigured state the only way to get the serial number is to check for a number plate at the back of the unit at the bottom of the rack with the controllers.
If the AMS is configured then simply plug in the IP address of the controller into a web browser which will display the serial number at the top of the web page.
Hope this helps
no i am asking about disk serial numbers not storage didnt understand my question thanks i figured
No need for CCI. You can download the drive constitute text file via SNM2 GUI:
Settings>Constitute Array>Select Raid Groups>Get Configuration>Select RG & DP>Download the text file. Drive config is towards the bottom.
You can use also use SNM2 CLI: audrive -vendor
super! sir thanks a lot this is what i needed
Retrieving data ...