AnsweredAssumed Answered

raidcom after VSM (G1000/G800)

Question asked by Kothandaraman Mannar on Oct 25, 2016
Latest reply on Nov 4, 2016 by Thrinath Seelam

I was able to use raidcom remotely through CMD, was able to do all storage related tasks.

But after G1000 configured with VSM (with VSP)...from the same remote system, raidcom not working.

Getting below error...

 

#raidcom get clpr

raidcom: [EX_CMDRJE] An order to the control/command device was rejected

#raidcom get pool

raidcom: [EX_CMDRJE] An order to the control/command device was rejected

 

I tried below steps..

1. Restarted the HORCM

2. raidcom -login raidcom XXXX

3. Assigned new CMD

 

From the same system, raidcom was working perfectly before creating VSM.

Do i need to make any change after new "VSM resource" added.

 

My horcm.conf

HORCM_MON
#ip_address        service         poll(10ms)     timeout(10ms)
localhost      horcm3          10000            30000

HORCM_CMD
#dev_name                dev_name                dev_name
\\.\CMD-XXXXXX:/dev/rdsk/*
HORCM_LDEV
#dev_group    dev_name    Serial No       LDEV#

HORCM_INST
#dev_group    ip_address    service
#testdg      localhost       horcm3

 

 

Thanks

Outcomes