I have connected from G800 to the host (windows server), How to present the Disk to WIndows server 2012 ? because when i check on windows there is nothing happened, the new disk or LUN tothe HOST ?
Please advice to step by step
I assume that you've already done the following,
Could you confirm?
By the way, are you using RAIDCOM in your environment? Is it a blade server?
Thanks for your Replay
Yes we have already configured all above, thats way I post this condtion because we have already that configuration and attached to Host (windows Server 2012) when we have cek Disk on this Host but The Host can not detected or show up what Lun we have present to the host.
So I confirmed
yes we are yousing RAIDCOM env, No itsn't a Blade server, But this is Server 4u (Supermicro)
Hi Syamsul Syarif
Have you rebooted your server?
Could you run the following commands and give me the output?
FC_switch1:admin> nodefind 50:06:0B:00:00:C2:C6:0C
FC_switch1:admin> zone --validate -m2 *HOSTWIN_HBA1_VSP3*
Effective configuration: zone: Z_HOSTWIN_HBA1_VSP3_1C 10:00:b4:b5:2f:6b:b0:71* 50:06:01:66:47:60:13:54 zone: Z_HOSTWIN_HBA1_VSP3_2C 10:00:b4:b5:2f:6b:b0:71* 50:06:01:6f:47:60:13:54
raidcom.exe get lun -port CL7-C HG_HOSTWIN -fx -I0
For -port, specify the port number, host group ID, and host group name, For -I, specify the instance number
raidcom get ldev -ldev_id 1348 -I0
Check this manual
Attach hosts to VSP Gx00 and Fx00 - Hitachi Data Systems Knowledge
Retrieving data ...