I have two hosts that one mount P-vol, and the other mount the S-vol. Both have
the command device assigned and CCI installed. Horcm10 file define the P-vol,
and horcm11 file define the S-vol.
All CCI command and scripts are issued from the remote host with S-vol as required.
Is there any way to flush data on the P-vol host without telnet from S-vol host?
I tried "raidscan -I10 -pi $Volume -find sync" on S-vol host, and it tells "
[SYNC : A volume to be flushed has nothing]". So I can only put a sub command
in the script that telnet to P-vol host then do the flush prior to perform the paircreate.
Any advice to improve this with a better way?