I have a Storage VSP G600 with two failed HDD.
the two disks were manually blocked and the data copied onto the spare disks.
Then those two disks were replaced. but they failed again.
Please, necesito ayuda.
oh,this error may be something wrong with controller,you need engineer to fix it.
initial set up may be fix it , but this step must be done by after sales.
I had the same situation when physically move system and remove-insert all HDD.
If you insert HDD in wrong position - you will have error "disk failed".
To solve problem just swap HDDs, i.e. insert HDDs in correct position.
I have the same problem .Then I replaced ENC cntl on DB 60 and all disk path are ok
Retrieving data ...