hello,
I have the following problem...
We have a AMS 2100 with snapshot QS-COW
We use Exchange Snapshot 3 times a day...Now we have less space on the public folder. So i want to increase the lun and de assoiciate Snapshopt Lu´s. But i get errors al the time..
Also i can´t delete de copy pair in Replication Manager.
Also in Pair Management I get a error when deleting a pair
Hope someone can help me with this isseu
Thx
RGRDS
Abderrahmane
Sorry for the late reply this is the output
c:\HORCM\etc>pairdisplay -g VG_MAIL11 -fcx -CLI -ISI104
Group PairVol L/R Port# TID LU-M Seq# LDEV# P/S Status % P-LDEV# M
VG_MAIL11 RDM_EXH_MAIL-1 L CL1-E-1 1 1 1 83052470 1 P-VOL PSUS 99 44d W
VG_MAIL11 RDM_EXH_MAIL-1 R CL1-E-0 1 6 0 83052470 44d S-VOL SSUS 99 1 -
VG_MAIL11 RDM_EXH_PUB-1 L CL1-E-1 1 2 1 83052470 2 P-VOL PSUS 99 44e W
VG_MAIL11 RDM_EXH_PUB-1 R CL1-E-0 1 7 0 83052470 44e S-VOL SSUS 99 2 -
VG_MAIL11 RDM_EXH_MAILLOG-1 L CL1-E-1 1 3 1 83052470 3 P-VOL PSUS 91 44f W
VG_MAIL11 RDM_EXH_MAILLOG-1 R CL1-E-0 1 8 0 83052470 44f S-VOL SSUS 91 3 -
VG_MAIL11 RDM_EXH_PUBLOG-1 L CL1-E-1 1 4 1 83052470 4 P-VOL PSUS 99 450 W
VG_MAIL11 RDM_EXH_PUBLOG-1 R CL1-E-0 1 9 0 83052470 450 S-VOL SSUS 99 4 -
thx
To delete the pairs they must me on simplex...with this command it wil do it but i get a error
errorlog:
COMMAND ERROR : EUserId for HOMRCF[104] : admin-abdel (0) Thu Mar 13 15:28:32 2014
CMDLINE : pairsplit -ISI104 -g VG_MAIL11 -d RDM_EXH_MAIL-1 -S
15:28:32-35b60-16564- ERROR:cm_sndrcv[rc < 0 from HORCM]
15:28:32-35b60-16564- [pairsplit] L_CMD(ERASEPAIR) ERROR :rc = -35
15:28:32-35b60-16564- [pairsplit][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM_LOG=C:\HORCM\log104\curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
Dear Abderrahmane,
Can you paste the line "It was rejected...." from the error output? The SSB code is helpful in troubleshooting the cause.
One common cause is missing Command Device. How is the CMD defined in the HORCM file? I'd check to see if it's still present.
Regards,
Dang Luong
Hello Dang,
This is the output
pairsplit: [EX_CMDRJE] An order to the control/command device was rejected
Refer to the command log(C:\HORCM\log104\horcc_SRV-EXH-11_log.txt) for details.
It was rejected due to SKEY=0x05, ASC=0x96, SSB=0x8400,0x00AC on Serial#(83052470)
Post output of the command below
raidvchkdsp -ISI104 -g VG_MAIL11 -v gflag -fe
hello Vinod see output below YHX
If you have access to the CCI command line can you post output of CCI CLI command below
export HORCMINST=<YOURINSTANCE>
pairdisplay -g VG_MAIL10 -fcx -CLI