Is there a way to run pairresync to place the svols into a psus state? Any assistance with this would be appreciated (I'm have opened a support call too).
I guess your only option is the below
1. pairsplit -IH<HORCMINSTANCENO> -l -g <GROUP> -S --> Run this on the P-VOL side
2. paircreate -IH<HORCMINSTANCENO> -g <GROUP> -f async -jp <JGNO> -js <JGNO> -vl --> Run this on the P-VOL side
Thanks for the reply! It turns out I have a second issue. I'm unable to run
commands from the pvol side - I can't connect to the horcm instance (this
is a separate issue).
Could I possibly run the following command from the svol side, while the
pair state is as follows svol - SMPL, pvol PSUS?
paircreate -IH91 -g HUR_prod -d 9DB01_26B2_2EB2 -f async 2 -jp 1 -js 0
Thank you again,
You have to run pairsplit -l first on the P-VOL side to switch the P-VOL to SMPL.
Then run the paircreate
Last night I worked with a Hitachi technician, and with his guidance, was able to restart replication. I basically ended up having to issue the commands outlined in your reply - Thank you again for your input!
Man am I kicking myself over this...
Talk to you,
Retrieving data ...