AnsweredAssumed Answered

pairdisplay command not working

Question asked by Syed Sadat Ali on Jun 4, 2014
Latest reply on Jun 11, 2014 by Vinod Subramaniam

Hi,

I have two P720 servers and configured lpar on each of them. I have installed AIX 6.1 on SAN Boot lun and not able to run below command

 

Primary lpar

# /HORCM/usr/bin/pairdisplay -g vg01 -I1

 

Where as i am able to run # /HORCM/usr/bin/pairdisplay -g vg01 -I1 -l << which show local content.

 

Just want to know why remote option is not running.

 

Just for more information. On both the lpars my horcm instance is running

 

HORCM instance no is : 1

Group name is HTC_vg1

 

Primary # ls /dev/hd* | /HORCM/usr/bin/inqraid -CLI

DEVICE_FILE     PORT    SERIAL  LDEV CTG  H/M/12  SSID R:Group PRODUCT_ID

hdisk0          -            -     -   -       -     -       - VDASD

hdisk1          CL3-B    25865    11   -       -  0004 5:01-01 OPEN-V-CM

hdisk10         -            -     -   -       -     -       - SYMMETRIX

hdisk2          CL3-B    25865    48   -  P/s/ss  0004 5:01-03 OPEN-V

hdisk3          CL3-B    25865    55   -  s/s/ss  0004 5:01-03 OPEN-V

hdisk4          CL3-B    25865    68   -  s/s/ss  0004 5:01-03 OPEN-V

hdisk5          CL3-B    25865    69   -  s/s/ss  0004 5:01-03 OPEN-V

 

 

 

Secondary # ls /dev/hd* | /HORCM/usr/bin/inqraid -CLI

DEVICE_FILE     PORT    SERIAL  LDEV CTG  H/M/12  SSID R:Group PRODUCT_ID

hdisk0          -            -     -   -       -     -       - VDASD

hdisk1          -            -     -   -       -     -       - -

hdisk10         -            -     -   -       -     -       - -

hdisk11         -            -     -   -       -     -       - -

hdisk12         -            -     -   -       -     -       - -

hdisk13         -            -     -   -       -     -       - -

hdisk14         CL1-B    54332   755   -       -  0006 5:01-03 OPEN-V-CM

hdisk15         CL2-B    54332  4246   -  S/s/ss  0014 5:01-04 OPEN-V

hdisk16         CL2-B    54332  2787   -       -  000E 5:01-04 OPEN-V-CM

hdisk17         CL2-B    54332  1547   -  s/s/ss  000A 5:01-03 OPEN-V

 

 

 

Primary # /HORCM/usr/bin/pairdisplay -g vg01 -I1 -l

Group   PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M

vg01    vg01_000(L) (CL3-B , 0, 435)25865    48.P-VOL PAIR NEVER ,54332  4246 -

 

Here is the error i am getting.

 

Primary # /HORCM/usr/bin/pairdisplay -g vg01 -I1

pairdisplay: [EX_ENORMT] No remote host alive for remote commands or Remote Raid Manager might be blocked (sleeping) on an existing I/O.

Refer to the command log(/HORCM/log1/horcc_vcsaxp720-2-v03.log) for details.

Outcomes