Hi Everyone !
I am studying the HUS families Storage. So
Can anyone tell step by step with picture for HUS 100 families ? just like that >>>
Create the volume and present to the host ! Create Dynamic Pooling. Thanks.
Its good to know that you are learning storage, But I strongly suggest you to attend the classes from HDS for understanding storage better. Alternatively you can also register in the portal and download the documents for reference, that will have the complete detail on what you ask.
I have given a overview below of the process.
Before you allocate storage the following things should be considered:
1. Know the port addresses
2.Enable Host Group Security
3.Create Host Groups
>> Hosts may be clustered
>> Any Host Group Settings
From an administration point of view you will have two tasks primarily:
1. Allocating Volumes
By default there will be two controllers viz, "Controller 0" and "Controller 1"
Enabling Host Group Security -
1.Browse through the storage
2.Expand Groups >> Host Groups
3.On the right hand side there will be 3 tabs, Click on the Host Group Security Tab
4.Click on the ports for which you have to enable security
5. In the next dialog check the "Tick" mark >> OK
Mapping Volumes to Host Groups
3.On the right hand side there will be 3 tabs, Click on the Host GroupS Tab
4.Create a host group or edit an existing host group
5.In the next dialog/window, Select the available ports in the top and Click on the Volumes tab below that.
6.Select the H-LUN and the required volume and click the ADD button
7.Click Apply >> OK to confirm.
Thanks sir !
Retrieving data ...