We normaly we using SNM2 GUL , But now we like to use SNM2 CLI , Kindly guide me how to use ..
What is the basic command & what is path to run the command
SNM2 CLI is similar to SNM2 GUI in that it resides on a server (could be Windows, Linux, Solaris, etc...). The server has to be able to communicate with the array(s) that you want to manage. Here's a basic outline of setting up SNM2 CLI on a Windows OS:
1) Run the executable installer
2) Open a Command Prompt window
3) Go to where SNM2 CLI was installed
4) Run startsnmen.bat
5) Run "auunitadd..." to register an array to manage
6) Start managing registered array. For example: "aurev -unit my_array" will display the firmware of the array registered as "my_array".
For more details, please download the SNM2 CLI User Guide. It's very comprehensive.
Hi Dang Luong,Request to see the below given output and Kindly help me to understant the probelm.
C:\Program Files (x86)\Storage Navigator Modular 2 CLI>startsnmen.bat
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Storage Navigator Modular 2 CLI>aurev -unit HUS150_XXXXXXX
DMEA001000: The information file for the subsystem cannot be opened. Confirm the execution environment.
C:\Program Files (x86)\Storage Navigator Modular 2 CLI>auunitinfo.exe -unit HUS150_9XXXXX
Did you already register the array using the auunitadd command? Also, make sure that you open the Command Prompt session with Administrator privileges.
Hi Gogul Natarajan, has you problem been solved?
Retrieving data ...