AnsweredAssumed Answered

paircreate error

Question asked by Erhan Demirhan on Aug 27, 2014
Latest reply on Sep 1, 2014 by Erhan Demirhan

Hi,

 

Whe i try to run paircreate , i get following error:

 

paircreate.exe -g srm_vipa -vl -f async -IH6

paircreate: [EX_CMDRJE] An order to the control/command device was rejected

Refer to the command log(C:\HORCM\log6\horcc_SRMANWXR01_log.txt) for details.

It was rejected due to SKEY=0x05, ASC=0x26, ASCQ=0x00, SSB=0xB90A,0xB99B on Serial#(210918)

 

I think command device is correct. Config we're using like this (horcm6.conf and horcm7.conf)

 

###horcm6.conf###

HORCM_MON

#ip_address        service         poll(10ms)     timeout(10ms)

xx.xx.xx.xx    horcm6            1000              3000

#/************************** For HORCM_CMD ************************************/

HORCM_CMD

\\.\PhysicalDrive2

#/************************** For HORCM_LDEV ***********************************/

HORCM_LDEV

srm_vipa      vipa_hvm01_g0500_gen01 210918 05:00

srm_vipa      vipa_hvm01_g0501_gen02 210918 05:01

#/************************* For HORCM_INST ************************************/

HORCM_INST

srm_vipa yy.yy.yy.yy  horcm7

 

###horcm7.conf###

HORCM_MON

#ip_address        service         poll(10ms)     timeout(10ms)

yy.yy.yy.yy        horcm7            1000              30000

HORCM_CMD

\\.\PHYSICALDRIVE2

HORCM_LDEV

srm_vipa      vipa_hvm01_g0500_gen01 211266 25:00

srm_vipa      vipa_hvm01_g0501_gen02 211266  25:01

HORCM_INST

srm_vipa  xx.xx.xx.xx.    horcm6

 

 

Can someone help me here?

Thanks

Outcomes