Is there some Best-practices for RHEL 6.5 with Boot on SAN on CB520X1 blades ?
The most recent document is about RHEL 6.3, and it seems there was some changes on multipath with 6.5.
Hi team infrastructure
basically what kind HBA are you use ? emulex or hitachi ?
I have one "Hitachi 8Gb 2-port fibre channel mezzanine card" on my blades
for Hitachi 8Gb 2-port fibre channel mezzanine card there is no different instalation but you must make sure that lun is already mapping by HBA bios.
Retrieving data ...