I have HUS 110. I just Directly connect to my laptop. Everything are Default. When i try to manage with Hitachi Storage Navigator Modular, Can't add ! When you add the array I get an error like DMEA001079, why?
how connect you the HUS110 to our Laptop?
per iSCSI? or have you FC?
you must change the Topologie from the Hostport
Hi one add...
what they wanted to do? they want to administer the HUS?, sign in the HSNM2?
have you set the IP? are you in same network? can you ping the IP?
And here iscsi or fc, the browser works locally with the service HSNM 2 and must establish a connection with the IP- address of the controller Hitachi. By the way on the other computer it works fine in the same mode .
Yes, I'm an admin Hus, ip is set , the network 192.168.17.0/24, ping works
Dear aleksad !
U means, another computer can add the array. am i right ? if so, u need to manually add the array, when the prompt comes out for the IP address, u should specific ip address range as below picture ! aleksad .
Thanks for the reply , made as in the figure , the device is not visible.
Hi Bro !
Can u connect to the maintenance ports with your laptop and give the ip address range which is 10.0.0.xxx
and then, u can add array again. After u see the array, In there, u can add the IP for the management ports,
If u have something problem, let me know !
Phyo Maung Maung
Sorry, the problem is solved, we conclude that the error was on an old version of SNM2
Retrieving data ...