AnsweredAssumed Answered

HORCM failure !

Question asked by phyo maung on Jan 18, 2015
Latest reply on Jan 28, 2015 by phyo maung

Hi Everyone !

 

         When i try to start the command >>> horcmstart

cannot start. help me please. Thanks.

 

Let me show u what i doing the procedure for the CCI.

I just create two volumes which is for the Command Devices as a 50MB and added to the command device in HUS 130.

Then, i map this 2 volumes to the Host via 0E(iSCSI). In the windows environments, i rescan the disk ( not Mount ).

I install the CCI software under c:\HORCM

 

Then I create 2 files which is horcm0.conf and horcm1.conf   

 

For horcm0.conf    >>>

HORCM_MON

#ip_address        service        poll(10ms)    timeout(10ms)

192.168.0.22      horcm0          1000              3000

 

HORCM_CMD

#dev_name                dev_name                dev_name

\\.\PhysicalDrive1

 

for horcm1.conf     >>>

#ip_address        service        poll(10ms)    timeout(10ms)

192.168.0.22      horcm1          1000              3000

 

HORCM_CMD

#dev_name                dev_name                dev_name

\\.\PhysicalDrive2


Then, i paste this 2 files to the path

c:\windows\

c:\HORCM\etc\


Then, Configure c:\windows\system32\drivers\ets\services file and add two lines at the and of the file. Mind port numbers are different


              horcm0    11000/udp    # hormc0

              horcm1    11001/udp    # hormc1

 

Then, i type

         

          C:\HORCM\etc>set HORCMINST=0

          C:\HORCM\etc>set HORCM_CONF=c:\horcm\etc\horcm0.conf

          C:\HORCM\etc>horcmstart








Outcomes