How can I enable the SCSI-3 Persistent Reservation on the VSP. Need urgent help on this
it is enabled\supported by default. you don't need to do anything.
It is enabled on all the host groups in the array right
Rahul Bhat you are fast in response!!!
Just like my post SCSI-3 Persistent Reservations.
hahaha ...that was because i was looking myself for something on the community
Maybe this as well will be helpful in regard to reservations :
Thanks to HDS, now you no longer need a password to release SCSI reservation on VSP LUNs. Below are the instructions to remove a reserve.
Click Ports/Host Groups in the Storage Systems tree.
The list of available ports appears in the tree.
In the tree, select a port.
The host groups corresponding to the port appear.
In the tree, select a host group.
Information about the selected host group appears on the right side of the window.
Select the LUNs tab on the right side of the window.
Information about LU paths associated with the selected host group appears.
On the menu bar, click Actions, Ports/Hosts Groups, and then View Host-Reserved LUNs. Or, select View Host-Reserved LUNs from the lower right of the window. The Host-Reserved LUNs window opens.
In the Host-Reserved LUNs window, select LUN to release the reservation by the host, and then select Release Host-Reserved LUNs. The Release Host-Reserved LUNs window opens.
Confirm the settings and enter the task name in the Task Name box.
A task name can consist of up to 32 ASCII characters (letters, numerals, and symbols). Task names are case-sensitive. (date) - (task name) is input by default.
Click Apply in the Release Host-Reserved LUNs window.
If the Go to tasks window for status check box is selected, the Tasks window appears
Retrieving data ...