Ivan Krasnov

Virtual Infrastructure Integrator Problem

Discussion created by Ivan Krasnov on Oct 7, 2015

Good day.

I had a problem with the original setting HVII(we have VMware vCenter 5.5 + HUSVM)

I took the HDS-V2I Administration Guide (MK-92HNAS003-06):

Installation is performed on a single server (HVII + vCenter + CCI). Announced commands-device, launched horcm instance.

 

c:\HORCM\Tool>raidscan -x findcmddev hdisk0,20

cmddev of Ser#  2xxxx3 = \\.\PhysicalDrive1

cmddev of Ser#  2xxxx3 = \\.\Volume{63b27fe3-5983-11e5-a861-000c2917b0a5}

 

c:\HORCM\Tool>inqraid $Volume -CLI -fv

DEVICE_FILE                                                  PORT    SERIAL  LDEV CTG  H/M/12  SSID R:Group PRODUCT_ID

Volume{63b27fe3-5983-11e5-a861-000c2917b0a5}\Vol2\Dsk1       CL2-B   2xxxx3    58   -       -  0004 A:00000 OPEN-V-CM

 

Volume{531847bd-f9a9-11e3-a094-806e6f6e6963}\Vol1\Dsk0       -            -     -   -       -     -       - Virtual disk

 

HORCM0.CONF

 

HORCM_MON

#ip_address    service        poll(10ms)        timeout(10ms)

10.x.x.251    horcm0        1000            3000

 

HORCM_CMD

\\.\PhysicalDrive1

 

HORCM_LDEV

#dev_group    dev_name    Serial#    CU:LDEV(LDEV#)    MU#

#RPL_SI_1    si01        2xxxx3    04:00        0

 

HORCM_INST

#dev_group    ip_address    service

#RPL_SI_1    10.x.x.251    horcm10

 

 

Problem description in picture

 

How add block storage(HUSVM) to HVII?

 

 

So sorry my english is poor (some google translate).

 

Ivan.

 

 

Add information

 

HUSVM firmware version - 73-03-37-00

CCI version WindowsNT/x64 01-34-03/04

Hitachi Dynamic Provisioning (HDP) License and Hitachi Thin Image (HTI) License - valid

Thin pool created

Attachments

Outcomes