How am i gonna access the CLI on our CB2000 Blade chassis? Also, is this a Hitachi switch?
i would also like to download the running config on the switch so that just in case i can just upload the same config to the new switch. would that be possible? thanks again..
- The switch is not Hitachi switch, but nevertheless the switch CLI is included in the PDFs.
- You can download the configuration two ways
a. You can use ftp to download the configuration
b. There is an SD card, you can download the configuration to it as well
Do you have the links to the PDF? I'm trying to look on our partner portal but am encountering errors.
Thank you so much
I recommend you logging into the switch by putty, you can use filezilla to transfer the configuration file.
The switch is a Brocade Switch.
More comment please. Just a little more detailed instruction please..thanks.
One way to access the switch modules is from the CB2000 chassis' CLI. Log in as administrator. Then choose option "SW. Start switch module console session."
Then select the desired switch, enter the appropriate credentials, and use this command:
Retrieving data ...