AnsweredAssumed Answered

SNMP setting

Question asked by Muhammad Ahsan on Jan 26, 2016

Hi All,

I need assistance on the following please.

I have configured SNMP for HUS-110 in SNM2 for one of monitoring tool "Logic Monitor.

the following setting i have done in config.txt file and name.txt file

 

config.txt

INITIAL sysContact "IT Admin"

 

INITIAL sysLocation " Data Center"

 

COMMUNITY gerab

ALLOW ALL OPERATIONS

 

MANAGER 192.168.x.x h

SEND ALL TRAPS TO PORT 162

WITH COMMUNITY "HITACHI DF800"

 

MANAGER 192.168.x.x

SEND ALL TRAPS TO PORT 162

WITH COMMUNITY "HITACHI DF800"

 

Here i gave the system IP address where i have install the monitoring tool for Storage monitoring.


my confusion: do i need to enter the storage IP address or it is correct setting.


Name.txt file

DF800-01 Hitachi Disk Array

is this correct array name for HUS-110 storage

Outcomes