I'm trying to boot from SAN a dell r420 with fc hbas qle2462, but no boot device.
I've already updated the hba firmware, but still no boot device.
Any advice ?
Thanks in advance.
Which os you are installing?What is the host group type you have set on g600 ?Did you set security lun masking
Sent from my Samsung device
Do the following steps
- power on the server
- look for wwn in the switch and use this wwn when you create a host group
- the host group should have the wwn discovered in the switch, and volume (assign this a lun0)
Reboot the server
- back to HBA
- select the wwn
- you will see the lun0 (the volme you mapped)
Now boot with the boot CD. When the screen comes to select disk where OS needs to be installed, ensure that you have the correct driver
(you can get Windows, RHL drivers from HDS)
Retrieving data ...