Data Test Track Derby Rules

By Roguen Keller posted 09-29-2019 20:16

  

For our Data Test Track Derby races, we inspected each car at weigh-in on race day. 

We will weigh each car with the "official scale" and will turn back any car that exceeded 5.0 oz in combined axle weight. We will then do a quick visual inspection of each car against the following inspection points: 

Car Dimension Rules

  • The overall length of the car shall not exceed 7 inches.
  • The overall width of the car shall not exceed 2 ¾ inches.
  • The overall height of the car shall not exceed 3 ¾ inches.  This is so that no collision occurs with the track timer.
  • The car must have 1 ¾” clearance between the wheels. (This is pre-determined by the use of the lego platform)
  • The car must have 3/8” clearance underneath the body so it does not rub on the track. (This is pre-determined by the use of the lego platform)

Derby Car Weight Rules

  • The car shall not exceed 5.0 ounces.
  • The official race scale that is used at car check-in shall be considered final.

Car Modifications Not Allowed

  • The provided lego car platform must be used. The lego blocks themselves may be shaped in any way that is desired.
  • Provided lego bricks must be used. Please don't bring your own
  • The axles may be altered, polished and lubricated.
  • Once a car passes inspection and is entered into the race, only race operators members can touch it.
  • Each car must pass inspection by the official race operators before it will be allowed to compete.
  • The race operators have the responsibility to disqualify those cars that do not meet these rules.  We can still capture your data for your though.

If you have a question about rules, be sure to ask the person running your race because they have the final say about what is and isn't legal for that race.


#ThoughtLeadership
#HitachiNEXT
#Blog
0 comments
0 views