Hi Sven, I have to correct that last part: -RF make the Svol simplex , reserved and no host access -RFV make the Svol simplex . Still has virt_ldev id and is accessible to hosts IO. -SF make the Pvol ...
Hi again, remember to use the -l (local) .. then you can address only the Svol or Pvol .. both storages do not have to be accessible to horcm. ------------------------------ Matt Muldoon Systems Engineer ...
Hallo Sven, please post raidcom get ldev -ldev id... for both p and s vols. But.. the pairsplit command will do it. To Split the pair removing the virtual_ldev_id from the SVOL. pairsplit -g gad00 ...
Hi Guru I have a question about UR targetting between DRD-VOL(DP-VOL with the data reduction function enabled) and DP-VOL. our prospect is considering UR between VSP 5600 with DRV-VOL and VSP E509 with ...
Hi Sven, i would just resync the pair (creating LDEV for 410 in #89) and then delete it again. You can just delete it forcibly, when both volumes are in I/O Mode "blocked" as i know. Best regards Toni ...
Epic Performance with Hitachi VSP 5600-2N and Hitachi Thin Image Advance (HTIA) Hitachi Virtual Storage Platform 5600 ...
There seems to be some confusion about the difference between SCSI-FCP and the enhancements of FC-NVMe. Let's start at the beginning ...