Hitachi Ops Center​

 View Only

  • 1.  Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-18-2024 07:35

    Hi guys, can somebody help with Analyzer detail view . How can I get Adaptive Data Reduction report, like in the picture below? 

    This ADR report is shown in this thread : Threat Investigation with Hitachi Ops Center Analyzer 10.8.3 (hitachivantara.com)

    But,  need help how to get this data in Analyzer Detail View.

    Thanks




    ------------------------------



  • 2.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-19-2024 10:09

    I Guys,

     

    GO to Heak Check,

     

    Click on one Storage

     

     

     

    Then click on the blue link of the storage you want :

     

     

    Then, go down, you get the ADR report : As I have G1000 I do not have any data but with VSP 5600 you must find some information :

     

     

     

     

    Thanks and regards,

     

    Sylvain BINDER

    Consultant, Global Delivery             

    Hitachi Vantara

     

    mobile: +33-061-316-2362

    email: sylvain.binder@HitachiVantara.com

     

    21 rue Camille DESMOULINS

    92130 Issy Les Moulineaux - France

     




    Original Message


  • 3.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-19-2024 10:15

    It is VSP E590, but still no data.



    ------------------------------


    Original Message


  • 4.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 08-01-2024 17:49

    ON 5600 model , OPS 11.0.2, select on the storage array name / serial and look for "CONFIGURATION",  it shows all kind of information on the tables . 

    At the bottom of the page, it has "REPORT" to export out with PDF / excel format.  In the excel file (zip file), it has a table with Adaptive Data Reduction info.

    If you are familiar to raidcom, use raidcom to show

     # raidcom get ldev -ldev_id   0xYYZZ   -key software_saving -I <instance number >

        where YYZZ is the LDEV ID in hex.  The unit BLK is in 512 bytes per block.

    OPS Detail View :

    • select storage
    • Look for View at upper right hand corner and select CONFIG

    excel table:



    ------------------------------

    ------------------------------

    Original Message


  • 5.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-19-2024 10:14

    Hello,

     

    Another method more direct is to go to the storage in the navigation pane and to select « View Configuration » in the right up corner of the windows :

     

     

     

     

     

     

    Cordialement,

     

    Sylvain BINDER

    Consultant, Global Delivery             

    Hitachi Vantara

     

    mobile: +33-061-316-2362

    email: sylvain.binder@HitachiVantara.com

     

    21 rue Camille DESMOULINS

    92130 Issy Les Moulineaux - France

     




    Original Message


  • 6.  RE: Adaptive Data Reduction - Analyzer Detail view reports
    Best Answer

    Posted 04-22-2024 03:08

    Hello Nino

    To get ADR Statistics you need to configure the CMRest connection on the Probe. Can you confirm if it is configured?

    If you login to the probe usually https://<ip>:8443/ You'll see the storage. If you click the hyperlink on the name of it you should see if it's configured. If not you'll have to stop the probe, configure it and then start the probe again:



    ------------------------------
    William Jansen Van Nieuwenhuizen
    Hitachi Vantara
    ------------------------------

    Original Message


  • 7.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-25-2024 02:38

    Hi William,

    thank you for your response.
    That was a catch, with CMRest configuration.
    In the meantime, I also received a response from a Hitachi engineer who send me instructions how to set it up.




    Original Message


  • 8.  RE: Adaptive Data Reduction - Analyzer Detail view reports

    Posted 04-25-2024 02:41

    Hello Nino

    That's good to hear! I'd appreciate it if you marked it as the answer for the next person that might run into the same issue :-)



    ------------------------------
    William Jansen Van Nieuwenhuizen
    Hitachi Vantara
    ------------------------------

    Original Message


Related Content