Data Protection

 View Only

  • 1.  Add External Volume via HSAE - LDEV ID always = 0

    Posted 09-30-2022 12:29
    Edited by System 10-17-2025 19:06

    When I add a new External Volume via HSAE, I can decide the Path_Group_ID, the Parity_Group, the Name, but I can't decide the LDEV ID !

    When I want to use this External Volume for a Quorum Device, the Quorum Device resides always on LDEV ID 0 !

    Or are there any options to choose the LDEV ID - I did not see ? 

    Regards
    Sven



    ------------------------------
    Sven Kirsten
    Systems Engineer
    SVA System Vertrieb Alexander GmbH
    ------------------------------


  • 2.  RE: Add External Volume via HSAE - LDEV ID always = 0

    Posted 10-20-2022 12:18
    Edited by System 10-17-2025 19:06
    If you use CCI you can choose the external LUN ID and also the Internal LDEV ID as you would like it.
    In HSAe it will default to LUN ID 0  and also LDEV ID whatever is the lowest free LDEV ID.
    Add the discovered External Volume
    $ raidcom add external_grp -path_grp 1 -external_grp_id 1-1 -port CL1-C -external_iscsi_name iqn.xxx.linux-iscsi.xxs-hsq001-iscsi:port1 -external_address 10.22.124.5 -lun_id 100  or 0

    or use another LUN ID

    Add ldev
     raidcom add ldev -external_grp_id 1-1 -ldev_id 0x0100 -capacity all

    Name the ldev
    raidcom modify ldev -ldev_id 0x0100 -ldev_name Quorum0
     
    enable  Quorum  on ldev Primary
     raidcom modify ldev  -ldev_id 0x0100 -quorum_enable 61108xx M800 -quorum_id 0
    Check Quorum
    raidcom get quorum



    ------------------------------
    Matt Muldoon
    Systems Engineer
    TD SYNNEX Germany GmbH & Co. OHG
    ------------------------------