Hi Frank,
If you login on the SVP, as the maintenance user, you should see the WebConsole for Device Manager aka Storage Navigator.
There is a Maintenance Menu Option, 2nd option at the top left. Click on that and then launch Maintenance Components (General).
That will bring up the Java App for the SVP. You might have to check in Internet Explorer, if it doesn't launch automatically.
By default you will be in "View Mode", so just click on that button, to change it to modify mode.
Once in "Modify Mode", you can click on "Information", the select "Log", then select "SIM and click on the "List" button.
From here you can select and mark all SIMS as completed.
Once you're done, remember to take the SVP out of Modify Mode, back to View Mode, otherwise the array will remain locked for maintenance.
Kind Regards
Johann
------------------------------
Johannes Du Toit [Designation]
SYSTEMS ENGINEER
Hitachi Vantara
------------------------------
Original Message:
Sent: 11-09-2021 06:06
From: frank caraglia
Subject: How to Manually Clear Sims - VSP R700
Hi
I have some Sims for faults that have been fixed that I would like to clear .
I have found some instructions that mention launching the SVP maintenance from the Actions Folder of Storage Navigator tool but that option does not appear for me.
I have also tried Actions > Pool > Clear Sims but although the task completed successfully it didnt clear any SIMS.
Does anyone have any suggestions?
------------------------------
frank caraglia
------------------------------