Flash Storage​

 View Only

  • 1.  E Series Implementation

    Posted 01-27-2023 15:42
    Hello, We have an implementation project to install Hitachi Storage Advisor, and Ops Center Administrator for newly installed E series array. Hoping to get some clarification on below:

    1.
    HSA Embedded - once we connect a local machine to the controller mgmt ports in front, anything else needs to be done in order to access the HSA?
    Is the 192.168.0.18 the default IP to access mgmt console? Where do I get the default credentials for the initial login?
    I know, we may get this from the CE, but just making sure.

    Would we be able to create pool (DT), and provision storage from HSA?
    Also looking for a document explaining all the options for pool creation and best practices.

    2.
    Hitachi Ops Center Administrator - Planning to install the OVF bundle, is there an option to install only the Administrator piece?
    Where do I find the default credentials for Ops center admin login?
    Can anyone please share step-by-step to discover E series array and the existing HNAS or point me to a document?

    3.
    Do we need to have probes installed in the environment.

    Thank you all for reading!

    ------------------------------
    VP
    ------------------------------


  • 2.  RE: E Series Implementation

    Posted 01-28-2023 08:24
    Dear Virat,

    Below is the answer of your question No. 2

    Yes you can also install the Administrator piece individually, standalone installer can be downloaded from the below link, you need to have your credential.

    https://support.hitachivantara.com/en/user/answers/downloads/downloads-detail.html?d=Ops%20Center%20Installation%20Media&pptype=Software%20Version

    The default credential for Administrator is sysadmin/sysadmin

    For step by step guide, please see the link for Administrator user guide and Getting started guide.

    User guide link:

    https://files.mtstatic.com/site_6669/232297/0?Expires=1674915417&Signature=JI8RvJZht1INWCoHq7cZr2-xdrr09H39kFwXfWcjYoQs~uLH9xLShHPML02poLWNfVgFcYULqAWdfoVpWz6Tj71zCg5LmyA~g252HHaheb3sCui~enUNP3Dso1VPnHtzHq0h~pbm~1Dcolj~3obGMqpeE-wnEkqKp~07MCFituA_&Key-Pair-Id=APKAJ5Y6AV4GI7A555NA

    Getting started guide

    https://files.mtstatic.com/site_6669/232294/0?Expires=1674915421&Signature=uw1t~yZZAv~NXV3kYLxKocrxomq3WEmaF1PIAZfTZq0-qTp0rX~nxrgOog5cmovAgG3T0jtPcPyQ-Ura4T8YHHvUZhQOmIRaemCJCtoqQ3gUWAqxfxVZEloJJDkWo8J5MFy5b7U~ISnbda4Jr2434nCn9f8XLPmRuJtj7FtEMKo_&Key-Pair-Id=APKAJ5Y6AV4GI7A555NA

    Answer for Question 3

    For Administrator installation you don't need to have Probe.

    Regards
    Prasenjit

    ------------------------------
    Prasenjit Chatterjee
    Test Engineer
    Hitachi Vantara
    ------------------------------

    Original Message


  • 3.  RE: E Series Implementation

    Posted 01-28-2023 08:39
    Dear Virat,

    Here is the answer to your question 1, along with the Hitachi Storage Advisor Embedded guide.

    The default credential for Storage Embedded guide is maintenance/raid-maintenance

    Link of the guide is https://files.mtstatic.com/site_6669/238586/0?Expires=1674916545&Signature=s7q6hb1~6KCI7bholGhbrIZShKxcoM--hIHPvvJ9oPM9z4pXYDvg3G9HZJAP4XJskz2fRMXLldrquIeA54C54csBqO~s86r5y-j4pr9IXxmXRA8t1fsC6gpAcI0PYj3LiJWyVA4OJjCXVqFyGh0XGuvovau9xYQb4vExme16Q20_&Key-Pair-Id=APKAJ5Y6AV4GI7A555NA

    Hope this will help you.

    Regards
    Prasenjit

    ------------------------------
    Prasenjit Chatterjee
    Test Engineer
    Hitachi Vantara
    ------------------------------

    Original Message


  • 4.  RE: E Series Implementation

    Posted 02-18-2023 13:25

    Thank you Prasenjit! Will check these out.



    ------------------------------
    VP
    ------------------------------

    Original Message


Related Content