Flash Storage​

 View Only
  • 1.  Storage Advisor Embedded - No SERVERS

    Posted 10-10-2022 02:34
      |   view attached
    Hi folks,

    I wondering in HSAE (Hitachi Stoprage Advisor Embedded) - I do not see the button "SERVERS" on the top left bar.
    I have running not the oldest microcode version, normally I would expect to have it.

    See attached screen shot.

    Any ideas ?


    Sven Kirsten
    Systems Engineer
    SVA System Vertrieb Alexander GmbH

  • 2.  RE: Storage Advisor Embedded - No SERVERS

    Posted 10-10-2022 03:40
      |   view attached
    Hello Sven

    Attached you can find a postman file that will enable and disable the server tab.

    The server tab is disabled the moment the storage array is registered with Hitachi Ops Center Administration. You can still access it via typing it in the URL bar as a workaround. But you'll see as part of the array onboarding in administrator that it disables the servers tab. To use the Postman collection you need to specify the following environmental variables in the 'eye' top right in Postman:
    • server=Array controller IP
    • username = username to use, something like maintenance
    • password = password of the user specified

    renamed .json to .txt to upload it here.

    Example here, you can run the 3 calls in the sequence listed:

    William Jansen van Nieuwenhuizen
    Hitachi Vantara

  • 3.  RE: Storage Advisor Embedded - No SERVERS

    Posted 10-11-2022 08:36
    Hello Sven,
    You need to install and configure MPC to enable server tab on HSAE.
    Once MPC installed, connect MPC to storage maintenance ports (normally, unless ips are changed).
    Open DOS prompt on MPC with "Run As Administrator" and run the batch file named "set_saeprovisioningenable.bat" from following path "C:\Mapp\wk\supervisor\gumsystemoptiontool"

    Logout from HSAE & Login back.

    Muhammad Asif