Flash Storage​

 View Only

  • 1.  Time synchronization VSP E1090

    Posted 02-02-2024 02:41

    Hello,

    i am looking for some document which describe firewall setting for time synchronization Hitachi VSP E1090.

    Common ports are not use. I catched: denied udp 192.168.135.28(123) -> 192.168.42.77(38769), 1 packet

    Can you help me?

    Thanks,

    Zbynek



    ------------------------------
    Zbynek Sotek
    Others
    NAKIT
    ------------------------------


  • 2.  RE: Time synchronization VSP E1090

    Posted 02-02-2024 02:55

    NTP requires bi-directional access on port 123. This is a known port and I doubt any specific Hitachi document to be available on this.



    ------------------------------
    Hassaan Pasha
    Systems Engineer
    Mideast Data Systems
    ------------------------------

    Original Message


  • 3.  RE: Time synchronization VSP E1090

    Posted 02-02-2024 03:01

    Hello Zbynek

    Please see "Changing the Controller Clock" in the Administration guide here:

    System Administrator Guide for Virtual Storage Platform E Series 93-07-2x

    SNTPv4 means you need UDP port 123 open in order to allow time synchronization. 

    You can verify this on the RFC for SNTPv4 here:

    RFC4330 Section 4 

    Best Regards
    ------------------------------
    William Jansen Van Nieuwenhuizen
    Hitachi Vantara
    ------------------------------

    Original Message


  • 4.  RE: Time synchronization VSP E1090

    Posted 02-02-2024 03:24

    Thank you very much.

    I read it before, but I do not have SVP.

    Is it the same for controllers?

    Thanks. Best regards.

    Zbynek



    ------------------------------
    Zbynek Sotek
    Others
    NAKIT
    ------------------------------

    Original Message


  • 5.  RE: Time synchronization VSP E1090

    Posted 02-02-2024 04:00

    Yes it is. You can do it on the embedded GUI without SVP as well.

    Please see the screenshot below, with the Online help in the Embedded GUI giving some details:


    @Johnny Koen, kindly provided the link to it in the docs as well:

    Date and Time Settings in Embedded
    ------------------------------
    William Jansen Van Nieuwenhuizen
    Hitachi Vantara
    ------------------------------

    Original Message


Related Content