Hitachi Ops Center​

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

so I  select the replication clone then
 after hiting (X)
i click delete icon
this will delete all the secondary vols for  that particular secondary site

------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Hello

Yes the X breaks down the replication and bin deletes the secondary side volume.


Regards
William

------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-15-2022 08:47
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

so I  select the replication clone then
 after hiting (X)
i click delete icon
this will delete all the secondary vols for  that particular secondary site

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12/15/2022 9:50:00 AM
From: William Jansen van Nieuwenhuizen
Subject: RE: remove protection of all GAD vols  at same time

Hello

Yes the X breaks down the replication and bin deletes the secondary side volume.


Regards
William

------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-15-2022 08:47
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

so I  select the replication clone then
 after hiting (X)
i click delete icon
this will delete all the secondary vols for  that particular secondary site

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

I DID DEACTIVATE DATA FLOW
THEN TEAR DOWN
BUT I WANTED TO RESUME SO I HIT THE PLAY BUTTON BUT I SEE
ANOTHER STATIC COPY how to get rid of those copies nothing in there

for resuming i also did IMPORT HA PAIR THEN ENABLE DATA FLOW


------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12-16-2022 07:56
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Yes you need to deactivate the dataflow.

For the remaining static copies. Just deactivate the data flow. Delete the static copies and the enable the data flow again.


Deactivating a data flow just means protector is no longer monitoring it. It still keeps volumes in pairs.
------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-16-2022 08:53
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

I DID DEACTIVATE DATA FLOW
THEN TEAR DOWN
BUT I WANTED TO RESUME SO I HIT THE PLAY BUTTON BUT I SEE
ANOTHER STATIC COPY how to get rid of those copies nothing in there

for resuming i also did IMPORT HA PAIR THEN ENABLE DATA FLOW


------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 07:56
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Ok so simply hit in delete icon after disable df
but  back to my previous question is it
mandatory to remove pairing to delete vols or we can delete mass vols without breaking pair of we want  to keep pair but delete vols ?

------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12-16-2022 12:39
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Yes you need to deactivate the dataflow.

For the remaining static copies. Just deactivate the data flow. Delete the static copies and the enable the data flow again.


Deactivating a data flow just means protector is no longer monitoring it. It still keeps volumes in pairs.
------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-16-2022 08:53
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

I DID DEACTIVATE DATA FLOW
THEN TEAR DOWN
BUT I WANTED TO RESUME SO I HIT THE PLAY BUTTON BUT I SEE
ANOTHER STATIC COPY how to get rid of those copies nothing in there

for resuming i also did IMPORT HA PAIR THEN ENABLE DATA FLOW


------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 07:56
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

I'm not sure I understand the question. Some observations that might answer your question:

• You can not delete a volume that has an replication relationship. You need to 'tear down' the relationship first
• Once the volume is a Static Volume you can delete the secondary volume from protector. 
• You can mass delete volume or mass tear down volumes. But be mindful that you might have to ensure that the appropriate steps are followed, for instance that the dataflow is deactivated before you can do so. 
• After your cleanup you can activate the dataflow again if you like to ensure that Protector is monitoring the pair again, and that you can operate the pair within protector.  Or if you dont need it you can delete the dataflow. 

------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-17-2022 02:04
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

Ok so simply hit in delete icon after disable df
but  back to my previous question is it
mandatory to remove pairing to delete vols or we can delete mass vols without breaking pair of we want  to keep pair but delete vols ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 12:39
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Yes you need to deactivate the dataflow.

For the remaining static copies. Just deactivate the data flow. Delete the static copies and the enable the data flow again.


Deactivating a data flow just means protector is no longer monitoring it. It still keeps volumes in pairs.
------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-16-2022 08:53
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

I DID DEACTIVATE DATA FLOW
THEN TEAR DOWN
BUT I WANTED TO RESUME SO I HIT THE PLAY BUTTON BUT I SEE
ANOTHER STATIC COPY how to get rid of those copies nothing in there

for resuming i also did IMPORT HA PAIR THEN ENABLE DATA FLOW


------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 07:56
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------

Original Message:
Sent: 12/19/2022 3:15:00 AM
From: William Jansen van Nieuwenhuizen
Subject: RE: remove protection of all GAD vols  at same time

I'm not sure I understand the question. Some observations that might answer your question:

• You can not delete a volume that has an replication relationship. You need to 'tear down' the relationship first
• Once the volume is a Static Volume you can delete the secondary volume from protector. 
• You can mass delete volume or mass tear down volumes. But be mindful that you might have to ensure that the appropriate steps are followed, for instance that the dataflow is deactivated before you can do so. 
• After your cleanup you can activate the dataflow again if you like to ensure that Protector is monitoring the pair again, and that you can operate the pair within protector.  Or if you dont need it you can delete the dataflow. 

------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara
------------------------------

Original Message:
Sent: 12-17-2022 02:04
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

Ok so simply hit in delete icon after disable df
but  back to my previous question is it
mandatory to remove pairing to delete vols or we can delete mass vols without breaking pair of we want  to keep pair but delete vols ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 12:39
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Yes you need to deactivate the dataflow.

For the remaining static copies. Just deactivate the data flow. Delete the static copies and the enable the data flow again.


Deactivating a data flow just means protector is no longer monitoring it. It still keeps volumes in pairs.
------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-16-2022 08:53
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

I DID DEACTIVATE DATA FLOW
THEN TEAR DOWN
BUT I WANTED TO RESUME SO I HIT THE PLAY BUTTON BUT I SEE
ANOTHER STATIC COPY how to get rid of those copies nothing in there

for resuming i also did IMPORT HA PAIR THEN ENABLE DATA FLOW


------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-16-2022 07:56
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

But william dn't we have to deactivate the data flow before we unpair ?

------------------------------
dhruv kalia
System Administrator
EVRY AB

Original Message:
Sent: 12-15-2022 02:42
From: William Jansen van Nieuwenhuizen
Subject: remove protection of all GAD vols  at same time

Hello

What I do is open up the developer tools on my browser, dump the rest call into a script and then pass it a list of all the ldev's I want to unprotect.

Here is a 'sample' video on how to do it using powershell, using lun creation as a sample, but you can do the same using method:
https://youtu.be/a4CCpywCbiU

Alternatively if they are all in protector you can easily mass select them in protector and break the replication and delete the secondary volume[Button next to the high-lighted volume]. After that you can clean up the primary volume in administrator if need be. Screenshot below:


------------------------------
William Jansen van Nieuwenhuizen
Hitachi Vantara

Original Message:
Sent: 12-13-2022 09:58
From: dhruv kalia
Subject: remove protection of all GAD vols  at same time

why cant i remove protection of all GAD vols
if i select one vol unprotection is ok ,
if i select more than one protected vol unprotecting icon goes grayed .not selectable



------------------------------
dhruv kalia
System Administrator
EVRY AB
------------------------------