Profile

Thomas Massano

Contact Details

My Content

1 to 20 of 27 total
Posted By Thomas Massano 05-30-2019 22:10
Found In Community: Hitachi Content Platform​
\ view thread
Here is the Version 3.0 Failover Script information. If you found this information useful, please like or mark helpful.
Posted By Thomas Massano 05-30-2019 22:07
Found In Community: Hitachi Content Platform​
\ view thread
Where can I find the HDI Failover Scripts #HitachiDataIngestorHDI #HitachiContentPlatformHCP
Posted By Thomas Massano 02-17-2019 21:15
Found In Community: Hitachi Content Platform​
\ view thread
Sudhir, Rajiv mentioned Anywhere could replace FTP in one of a couple ways: As incoming with upload and list/read access: https://hcpanywhere.hitachivantara.com/u/gZj7nnwY_r-TmPuS/Incoming?l Incoming with upload access, but NO list/read: (Blind Drop) https://hcpanywhere.hitachivantara.com/u/ngQ4XGOE ...
Posted By Thomas Massano 02-17-2019 20:48
Found In Community: Hitachi Content Platform​
\ view thread
I believe Jeff Stewartwas working on one.... Regards,   Thomas Massano Data Intelligence Technical Expert, Eastern Division
Posted By Thomas Massano 01-29-2019 15:45
Found In Community: Hitachi Content Platform​
\ view thread
Has garbage collection run? Perhaps run it again and make sure via the logs that it was successful. Also make sure the namespace is not being replicated. If none of those work I would suggest opening a support case.
Posted By Thomas Massano 01-14-2019 13:47
Found In Community: Hitachi Content Platform​
\ view thread
Im still going to document mine, as I did it all via the Exchange Command Shell, not the GUI. From a high level, Exchange mailbox servers have databases that house the messages, it can have multiple DBs that create a DAG (Database Availability Group). One form of journaling is at the DB level, every ...
Posted By Thomas Massano 01-13-2019 17:26
Found In Community: Hitachi Content Platform​
\ view thread
I got it working with 2016 in my lab! I just saw your post Rowayne, I took a quick look at the document, and it looks the same as 2016. So Clifford Grimm this document should work for you!
Posted By Thomas Massano 01-10-2019 23:09
Found In Community: Hitachi Content Platform​
\ view thread
I as recall from previous versions of Exchange it very simple. I found a Exchange 2013 Eval version, you want me to set it up in my lab and give you the step by step? It may not be exactly the same as Exchange 2016.
Posted By Thomas Massano 01-05-2019 14:30
Found In Community: Hitachi Content Platform​
\ view thread
Answer was provided by Dia Ali On the primary HDI navigate to file system you want to access in DR under the resources tab. Click edit Expand the option Namespace sharing settings. Make note of the username (typically same as FS name) and create a password. This will be used later on the DR HDI If the ...
Posted By Thomas Massano 01-05-2019 14:27
Found In Community: Hitachi Content Platform​
\ view thread
How to setup an HDI to read from the Read Only Namespace in Data Center 2 #HitachiContentPlatformHCP #HitachiDataIngestorHDI
Posted By Thomas Massano 10-11-2018 21:06
Found In Community: Hitachi Content Intelligence​
\ view thread
GOT IT! Thank you for your guidance and patience.
Posted By Thomas Massano 10-11-2018 20:57
Found In Community: Hitachi Content Intelligence​
\ view thread
Thanks Jon, so it should be: node 1 bin/setup -i 192.168.35.235 -m 192.168.35.235,192.168.35.236,192.168.35.237,192.168.35.238 node 2 bin/setup -i 192.168.35.236 -m 192.168.35.235,192.168.35.236,192.168.35.237,192.168.35.238 node 3 bin/setup -i 192.168.35.237 -m 192.168.35.235,192.168.35.236,192.168 ...
Posted By Thomas Massano 10-11-2018 20:40
Found In Community: Hitachi Content Intelligence​
\ view thread
This content was either too long or contained formatting that did not work with our migration. A PDF document is attached that contains the original representation   I have installed HCI several times with no issue, I have even created a cheat sheet.But I must be missing something basic here, the install ...
Posted By Thomas Massano 06-23-2018 13:13
Found In Community: Hitachi Content Intelligence​
\ view thread
To see what each service is consuming go to: Home > Monitoring > Dashboard > Services You can see the disk used by each service In this example, the Message-Queue is consuming 2.2TB, which is suspicious. Further HCM investigations revealed that this HCM is undersized and cannot keep up with the HCP logs ...
Posted By Thomas Massano 06-23-2018 13:02
Found In Community: Hitachi Content Intelligence​
\ view thread
How can I tell what is consuming capacity on my HCI / HCM? #HitachiContentIntelligenceHCI #HitachiContentMonitorHCM
Posted By Thomas Massano 06-07-2018 02:27
Found In Community: Hitachi Content Platform​
\ view thread
How to figure out what type of HCP and SNode hi-track is reporting on, due to its generic labeling. Also at the bottom is how to search by country/region/district and export the results. http://hitrack.hds.com:8083 After you have found the HCP or SNODE you were looking for, click Nodes in the left sidebar ...
Posted By Thomas Massano 06-07-2018 02:20
Found In Community: Hitachi Content Platform​
\ view thread
How can I tell what model HCP and or SNODE is in Hi-Track? #HitachiContentPlatformHCP #Development
Posted By Thomas Massano 06-06-2018 22:48
Found In Community: Hitachi Content Platform​
\ view thread
The mib file is on the installation iso, under etc/snmp/STD-EX-MIB.txt Posted to community STD-EX-MIB.txt