Profile

volker osswald

Contact Details

My Content

1 to 8 of 8 total
Posted By volker osswald Aug 28, 2020 8:28 AM
Found In Community: Data Protection
\ view thread
If not is there from whoever an Interpreter / translater? or do we have to rewrite all those scripts into a HDS language manually? Thanks and best regards, Volker #DataProtection
Posted By volker osswald May 12, 2019 3:38 PM
Found In Community: Flash Storage​
\ view thread
Hi John, thanks for your answer. So, just to be sure, i have to do the following: on the VSP G 370 #1  ( left site ) i issue the command: pairsplit -g xxxx -d yyyy -RS -IH0 and after confirming, that all is ok, i issue the command: pairresync -g xxxx -d yyyy -swaps -IH0   where 0 represents the left ...
Posted By volker osswald May 8, 2019 1:49 PM
Found In Community: Flash Storage​
\ view thread
Hi Experts, i need your help on a „special“ Question with GAD configurations. At a customer i have the following configuration: 2x VSP G370 connected with GAD Links, all volumes are ALUA enabled. The distance between the two DPCenters is around 50km. So Server1 has active path to the volumes of VSP G370 ...
Posted By volker osswald Mar 4, 2019 9:44 AM
Found In Community: Object Storage​
\ view thread
Hi Bill, as far as i know its HMO 54 and 63 for VMWare you have to use. Best regards, Volker
Posted By volker osswald Feb 28, 2019 10:32 AM
Found In Community: Flash Storage​
\ view thread
Hi, in the Provisioning guide on page 100/101 you find it in the table. here is a partial copy: regards, Volker
Posted By volker osswald Feb 28, 2019 9:52 AM
Found In Community: Flash Storage​
\ view thread
Hi, UVM is not possible on HUSxxx systems - for using this, you need a VSP( all models ) or USPV. I would do a Truecopy from HUS110 to HUS150, to move all data. Then you need an offline window to Split all Volumes, activate the new zoning ( all servers point to the HUS150 - be sure that all Zones to ...
Posted By volker osswald Feb 18, 2019 10:39 AM
Found In Community: Flash Storage​
\ view thread
Hello, I have a G1500 in one Location and a G1000 in another Location. Distance is about 500km. I want to connect them via HUR. They have 2x 7800 installed in every Location. The Distance from 1x 7800 to the G1500 is about 2km, the other 7800 is 500m distance. I have only Shortwave SFPs on the G1500. ...