Profile

Daniel Kleeman

Bridge Partners Ltd

Contact Details

Bridge Partners Ltd

My Content

1 to 10 of 10 total

RE: Correct procedure to remove a tray

Posted By Daniel Kleeman 10-18-2022 13:48
Found In Community: Converged & Hyperconverged Infrastructure \ view thread
I believe that the correct answer is to replace the tray, connect it and re-power up the whole system. The tray will then be accessible to the system with all its failed drives. If any drives are "blocked" then you can remove and replace them and they will then go to green status. When they are all green ...

RE: Vendor/Product string for VSP F600

Posted By Daniel Kleeman 10-18-2022 13:46
Found In Egroup: Flash Storage​ \ view thread
I believe the correct answer is "HITACHI DF600F" (without the quotes) ------------------------------ Daniel Kleeman ------------------------------

Correct procedure to remove a tray

Posted By Daniel Kleeman 08-03-2022 11:24
Found In Community: Converged & Hyperconverged Infrastructure \ view thread
What is the correct procedure to remove a tray from a VSP Gx00 and remove it from the config? We have powered off a tray with a single parity group but no LDEVs. The drives now show as "Failed" in the maintenance utility, which is expected.  We cannot delete the parity group using Device Manager and ...

RE: New Ops Center Portal install via installer gives "404" error

Posted By Daniel Kleeman 07-13-2020 09:01
Found In Community: Pentaho \ view thread
We have had a similar problem and not tried Williams suggestion yet. I find it surprising that Hitachi Vantara has released this packaged product with obvious errors in it. I do not think that testing has been sufficient.

G350 compression performance question

Posted By Daniel Kleeman 07-06-2020 11:08
Found In Community: Flash Storage​ \ view thread
Are there any blog posts or discussions that give any real-world information about the performance hit for compression on SSD on the G350 series (or similar)? #HitachiVirtualStoragePlatformVSP #FlashStorage

RE: How to enable deduplication on G350

Posted By Daniel Kleeman 07-06-2020 10:44
Found In Community: Flash Storage​ \ view thread
I believe that the correct answer is that you must be using the Device Manager Storage Navigator (i.e. logged in to the SVP Windows session).

RE: Retrieve HCP Storage Pool capacity details through SNMP OIDs or Management API?

Posted By Daniel Kleeman 07-06-2020 10:40
Found In Community: Hitachi Content Platform​ \ view thread
Have you looked at HiCommandCLI? This will retrieve these details.

How to enable deduplication on G350

Posted By Daniel Kleeman 06-19-2020 16:04
Found In Community: Flash Storage​ \ view thread
I am struggling to see how to enable deduplication on a G350 using either Command Suite or Device Manager - Storage Navigator.   My pool is a single tier with one parity group of SSD.   I am following the provisioning guide that says   Before you begin • The Storage Administrator (Provisioning) role ...

HUS: DP Optimization is suspended

Posted By Daniel Kleeman 02-09-2019 10:31
Found In Community: Flash Storage​ \ view thread
I have started a normal DP Optimization task (with ZPR) on a DP Pool with four volumes. Two of the volumes are now stuck on status of suspended and the other two are pending. The event log shows the following which indicates that the ZPR has completed but that the optimzation pass has not started: 02/09/2019 ...

Authentication problem with Device Manager and SVP

Posted By Daniel Kleeman 04-16-2018 16:12
Found In Community: Flash Storage​ \ view thread
We have a G200 managed by a Device Manager on a Windows server. Generally, the Device Manager setup seems to be working OK and data collection tasks are running correctly. In the Resources tab we can click on a number of links in the menu and see correct information about the G200, e.g. DP Pools, Parity ...