Profile

You must POWER ON tray to change drive status, once drives in tray are UP/GREEN, then delete LDEV/Mapping before deleting Raid Group.

Hello Sven, You need to install and configure MPC to enable server tab on HSAE. Once MPC installed, connect MPC to storage maintenance ports (normally 10.0.0.16,10.0.0.17 unless ips are changed). Open DOS prompt on MPC with "Run As Administrator" and run the batch file named "set_saeprovisioningenable.bat" ...

Hello Owais, Its is not possible. ------------------------------ Muhammad Asif ------------------------------

Hello Owais, It is not possible. ------------------------------ Muhammad Asif ------------------------------

Hello Edward, Navigate to correct HORCM driectory to issue below command to find out CMD device. C:\HORCM\etc>raidscan -x findcmddev hdisk0,100 Command Output will be something like this... cmddev of Ser# XXXXXX = \\.\PhysicalDrive15 ------------------------------ Muhammad Asif -- ...

Hello David, From Hitachi, you can use Hitachi Dynamic Link Manager. https://knowledge.hitachivantara.com/Documents/Management_Software/Dynamic_Link_Manager_and_Global_Link_Manager/8.8.x/User_guides/Dynamic_Link_Manager_for_Windows_User_Guide ------------------------------ Muhammad Asif --- ...

VSP G370/F350 - Each Controller with 1 x 10-core Intel Broadwell EP Xeon 2.2 GHz processor VSP G700/F700 - Each Controller with 2 x 6-core Intel Broadwell EP Xeon 1.7 GHz processor ------------------------------ Muhammad Asif Administrative Assistant Tech Access Asia FZ-LLC ---------------- ...