Profile

William Jansen Van Nieuwenhuizen

Hitachi Vantara

Contact Details

Hitachi Vantara

My Content

1 to 20 of 50+ total

RE: Documentation on adding second Drive tray to E590

Posted By William Jansen Van Nieuwenhuizen 03-12-2026 14:49
Found In Egroup: Block Storage \ view thread
Hello Rich Do you know what kind of disk tray you're trying to add and what's there already? If you have a SN I can look it up as well. Maybe this post in the past helps you: https://community.hitachivantara.com/discussion/how-to-hot-add-dbs2-disk-shelf-to-vsp-e-590  ------------------------------ ...

RE: The server tab is disabled after registering with OPS

Posted By William Jansen Van Nieuwenhuizen 12-16-2025 14:08
Found In Egroup: Block Storage \ view thread
There should be a little drop down next to reply where the original poster can mark it as 'Best Answer'. I see you're not the original poster so that might be why you don't have the option. No problem. :-). I'm sure the post as it should help the next person to a solution. ------------------------------ ...

RE: The server tab is disabled after registering with OPS

Posted By William Jansen Van Nieuwenhuizen 12-16-2025 13:21
Found In Egroup: Block Storage \ view thread
Thats very kind of you to share back to the community, thank you! ------------------------------ William Jansen Van Nieuwenhuizen Hitachi Vantara ------------------------------

RE: The server tab is disabled after registering with OPS

Posted By William Jansen Van Nieuwenhuizen 12-16-2025 08:54
Found In Egroup: Block Storage \ view thread
Hello You can also enable it via the RestAPI. I've created a simple powershell script you can use to enable it too.  # Hitachi Array - Enable Server Provisioning # Prompt for credentials $ip = Read-Host "Enter IP address" $username = Read-Host "Enter username" $password = Read-Host "Enter ...

RE: Procedure to change the IP Address in Protector

Posted By William Jansen Van Nieuwenhuizen 11-24-2025 09:50
Found In Egroup: Ops Center \ view thread
Hello A support case might be best next step. Any userful feedback from a systemctl status cofiohub? ------------------------------ William Jansen Van Nieuwenhuizen Hitachi Vantara ------------------------------

RE: Procedure to change the IP Address in Protector

Posted By William Jansen Van Nieuwenhuizen 11-24-2025 08:38
Found In Egroup: Ops Center \ view thread
Hello If you check if the setconfig IP is correct. maybe just to see if that helps the service start? Regards William ------------------------------ William Jansen Van Nieuwenhuizen Hitachi Vantara ------------------------------

RE: Procedure to change the IP Address in Protector

Posted By William Jansen Van Nieuwenhuizen 11-23-2025 10:27
Found In Egroup: Ops Center \ view thread
Hello Sven to my knowledge this information is backed up with restored with the mastersettings command. Take a look here: https://docs.hitachivantara.com/r/en-us/ops-center-protector/7.8.x/mk-99prt002/command-line-interface-reference/archiving-master-node-setting-with-mastersettings ...

RE: Unamanged replication pairs,

Posted By William Jansen Van Nieuwenhuizen 11-13-2025 08:14
Found In Egroup: Data Protection \ view thread
Hello Janis Looks good what did the job log show? Could you afterward see the replications in protector under the storage, to do the cleanup? ------------------------------ William Jansen Van Nieuwenhuizen Hitachi Vantara ------------------------------

RE: Unamanged replication pairs,

Posted By William Jansen Van Nieuwenhuizen 11-05-2025 13:49
Found In Egroup: Data Protection \ view thread
Hello Janis Could you perhaps share: The list of 'unmanaged volume pairs' in Administrator The 'block host' node you created in protector A Screenshot of the data protection flow you configured, can just be the summary as displayed on the destination node in the data flow in ...

RE: Unamanged replication pairs,

Posted By William Jansen Van Nieuwenhuizen 10-31-2025 08:55
Found In Egroup: Data Protection \ view thread
Hello Do you know what version of Ops Center you're running? Depending on what you have setup you can do this either from the SVP or Ops Center. Detecting the replication pairs: For G600 do you have an SVP, if so you can login these and just delete the replication partners, ...

RE: Hitachi Vantara VSP One File: NAS Backup from Storage Snapshot with Veeam Backup & Replication

Posted By William Jansen Van Nieuwenhuizen 10-23-2025 16:20
Found In Egroup: Data Protection \ view thread
Thanks Mark! Great post. Thanks for sharing. If the users want to check out more of it they can check out this video that @Johannes Du Toit made. He is also the orginal author of the scripts :-).  ------------------------------ William Jansen Van Nieuwenhuizen Hitachi Vantara ...

RE: Analyzer Adapter NOT FOUND - It comes with Analyzer Probe

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 14:29
Found In Community: Ops Center \ view thread
Yes, I'm not sure which version it got introducted but 11.0.2 is quite old. Upgrade the probe and try again for reference i'm running 11.0.5 but I think I configured the adapter in 11.0.4 already.

RE: Analyzer Adapter NOT FOUND - It comes with Analyzer Probe

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 13:52
Found In Community: Ops Center \ view thread
Hello No install, its just on the probe.  What version are you running of the probe if you go to https:// :8443?

RE: Analyzer Adapter NOT FOUND - It comes with Analyzer Probe

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 13:10
Found In Community: Ops Center \ view thread
Sorry, I miss understood I thought you wanted to configure this on the ops center VM. Can you send a screenshot of your probe status and version?

RE: Analyzer Adapter NOT FOUND - It comes with Analyzer Probe

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 12:55
Found In Community: Ops Center \ view thread
Hello No theres not since the Detailed view services and the probe services uses similar ports etc. Youll have to deploy a probe server and configure it on there.   With VSP 360 (went GA today) this might be different since the probes run as containers all on the same server but it doesnt yet have all ...

RE: Is there a 200 TB limit on VSP One SDS Block on BM with mirroring redundancy?

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 04:31
Found In Community: Software Defined Storage \ view thread
Hello Can you show your drive tab? It shouldn't be the case. Did you add all of them into the pool? Regards William

RE: Analyzer Adapter NOT FOUND - It comes with Analyzer Probe

Posted By William Jansen Van Nieuwenhuizen 08-27-2025 04:23
Found In Community: Ops Center \ view thread
Hello Sudhir :-) It's important that you login to the Probe not the Ops Center VM. Could you check that you're on the probe via Analyzer Detailed view > status and check the hostnames or IP's listed there. That is where you configure it. Below is for instance my probe, you'll also see the sample reports ...

RE: HUR For Multiple resource groups in G5600

Posted By William Jansen Van Nieuwenhuizen 07-18-2025 05:43
Found In Egroup: Data Protection \ view thread
Hello SAM.  I dont see a problem with what you're doing. As long as the GAD relationship was cleaned up properly or if you're setting the correct mirror ID. Users belong to a VSM. It could be that the user you're using doesn't have access to the VSM that the migrated volumes are in. Could ...

RE: migration

Posted By William Jansen Van Nieuwenhuizen 07-17-2025 05:11
Found In Egroup: Infrastructure Solutions \ view thread
Hello Genoveva Yes, It's always a good idea to use our GA SVOS version on your hardware. If you need motivation, accessing the install base via our Cloud Portal Clear Sight(available at clearsight.hitachivantara.com) would give you insights in the security dashboard wrt vulnerabilities etc.  ...

RE: ADR Disabled for few LDEVs

Posted By William Jansen Van Nieuwenhuizen 06-28-2025 10:47
Found In Community: Ops Center \ view thread
Yes If it's Thin it's non ADR. If it has compression or compression+deduplication it's considered ADR.  Enabling it depening on the model adds some overhead in processing. Most machines the CPU is low under 30% and then the impact is minimal but the efficiency gained is more. You can always turn it off ...