Hitachi AMS 2100 brakes.
Logs: W3M000 PIN is over RAID group threshold[write will not run](DIR-1,RG-01)
Hi Denis Smolin
Understanding the message
W3M000: here is what it means and what should be done
This is the normal recovery procedure for over Pinned data
Hope this helps
Let us know if you have anything on it
i did not understand the situation
Can you please explain the status of ur AMS2100
Is it down??
Hitachi ams 2100 is not currently running.
No access to the LUN 10, RG-01.
05/12/2016 08:00:24 10 I1GJ00 Forced parity correction is stopped by too many PINs(PTT-01,LU-0005) :MANUAL/STRC
05/12/2016 08:00:24 10 I1GB00 Forced parity correction is started(LU-0005)
05/12/2016 00:19:52 00 I0072C HDU recovered(Unit-00,HDU-08)
05/12/2016 00:19:52 00 I15300 Data recovery partial(Unit-00,HDU-08) :MANUAL/STRC
05/11/2016 17:56:38 10 W3M000 PIN is over RAID group threshold[write will not run](DIR-1,RG-01) :MANUAL/STRC
05/11/2016 14:33:11 00 I15000 Data recovery started(Unit-00,HDU-08)
How to run this procedure in Hitachi storage navigator modular 2?
LUN 10 is blocked.
Retrieving data ...