AnsweredAssumed Answered

VMware SRM

Question asked by Nicky Simpson on Mar 27, 2014
Latest reply on Aug 18, 2014 by Gogul Natarajan

Hi,

 

I'm after some help, I've inherited a system which has VMware and SRM for DR.  SRM was working without any issues until the start of this week, where when I run an SRM test I get the following error:  "Error: Non-fatal error information reported during execution of SRA: Failed to create lun snapshots."

 

I have checked the HORCM services which are both up and running HORCM1.conf on Production HORCM2.conf on the DR side.

When I have check the logs here:C:\HORCM\log3\curlog I get the below:

 

*****************************************************************************

            -  HORCM STARTUP LOG - Thu Mar 27 10:48:48 2014

*****************************************************************************

10:48:48-e9660-05844- horcmgr started on Thu Mar 27 10:48:48 2014

10:48:48-e9660-05844- _spawnvp() horcmd_03 using c:\HORCM\etc\horcmgr [CWD=C:\Program Files (x86)\VMware\VMware vCenter Site Recovery Manager\bin]

10:48:48-ec928-04756- Fibre address conversion TBL has been set to '3'

 

P.P.   : RAID Manager for WindowsNT/x64

Model  : RAID-Manager/WindowsNT/x64

Ver&Rev: 01-26-03/02

Release: Production(GA)

 

ALL Rights Reserved, Copyright (c) 1998-2011, Hitachi, Ltd.

 

HORCM(LAPBDVC01 4756) started by SA-VirtualCenter (0) on Thu Mar 27 10:48:48 2014

 

10:48:48-ed0f8-04756- horcmd_03 started on Thu Mar 27 10:48:48 2014

slmcmrhdr size = 56 bytes

rqry_test size = 288 bytes

rpprc_cmd size = 688 bytes

rread_cfg size = 208 bytes

rwait_evt size = 184 bytes

10:48:48-ed0f8-04756- ******** starts Loading library for IPv6 *******

[ AF_INET6 = 23, AI_PASSIVE = 1 ]

getaddrinfo() : Linked on Ws2_32.dll

inet_pton()   : Linked on Ws2_32.dll

inet_ntop()   : Linked on Ws2_32.dll

10:48:48-ed0f8-04756- ******** finished Loading library **************

*********** SYSTEM ERROR ***********

P.P.   : RAID Manager for WindowsNT/x64

Model  : RAID-Manager/WindowsNT/x64

Ver&Rev: 01-26-03/02

Release: Production(GA)

 

   Host: LAPBDVC01

EUserId: SA-VirtualCenter (0)

Process: 4756

 

[System Call Error]

SysCall: access

Errorno: 2 (No such file or directory)

ErrInfo: Internal Error

ErrTime: Thu Mar 27 10:48:48 2014

SrcFile: horcmcfg.c

SrcLine: 3679

 

There is not a configuration file: C:\Windows\horcm3.conf.

Make sure your env. variable HORCM_CONF points to this file

10:48:48-ed0f8-04756- ERROR:horcm_cfg_create

10:48:53-eadd0-05844- horcmgr:Failed to connect to HORCM.

 

Now to my untrained eyes it looks like it is trying to use "C:\horcm3.conf" something which has never been in place.

 

Any idea's?

 

Thanks

Outcomes