AnsweredAssumed Answered

CCI volume migrator paircreate error

Question asked by Mohd Azmir Abd Aziz on Aug 12, 2014
Latest reply on Aug 13, 2014 by Vinod Subramaniam

hi,

we encounter error to do paircreate as below

paircreate -IM32 -g group1 -vl -c 10 -m cc

paircreate: [EX_CMDRJE] An order to the control/command device was rejected

Refer to the command log(/HORCM/log32/horcc_T64BFH229.log) for details.

It was rejected due to SKEY=0x05, ASC=0x26, ASCQ=0x00, SSB=0xB9A0,0x20E1 on Serial#(91229)

 

however we can do pairdisplay for this group1

# pairdisplay -g group1 -IM32 -fcx

Group   PairVol(L/R) (Port#,TID, LU-M) ,Seq#,LDEV#.P/S,Status,   % ,P-LDEV# M

group1  group1-d3(L) (CL5-C-2, 0,   4-0 )91229  1004.SMPL  ----,-----   ----- -

group1  group1-d3(R) (CL3-B-0, 0,   2-0 )91229  bb04.SMPL  ----,-----   ----- -

group1  group1-d4(L) (CL5-C-2, 0,   5-0 )91229  1005.SMPL  ----,-----   ----- -

group1  group1-d4(R) (CL3-B-0, 0,   3-0 )91229  bb05.SMPL  ----,-----   ----- -

group1  group1-d7(L) (CL5-C-2, 0,  10-0 )91229  100a.SMPL  ----,-----   ----- -

group1  group1-d7(R) (CL3-B-0, 0,   6-0 )91229  bb0a.SMPL  ----,-----   ----- -

group1  group1-d8(L) (CL5-C-2, 0,  11-0 )91229  100b.SMPL  ----,-----   ----- -

group1  group1-d8(R) (CL3-B-0, 0,   7-0 )91229  bb0b.SMPL  ----,-----   ----- -

group1  group1-d9(L) (CL5-C-2, 0,  12-0 )91229  100c.SMPL  ----,-----   ----- -

group1  group1-d9(R) (CL3-B-0, 0,   8-0 )91229  bb0c.SMPL  ----,-----   ----- -

group1  group1-d10(L) (CL5-C-2, 0,  13-0 )91229  100d.SMPL  ----,-----   ----- -

 

need expert help why paircreate fail

Outcomes