Just testing GAD these days with different failure scenarios.
Wondered, how to failback, if, e.g., the "primary site" P-VOL is PSUE and the S-VOL is SSWS.
Machines are up and running from the "S-VOL"-site.
The User Guide just said "resynchronize pairs".
I've done it with -swaps from the S-Vol Site (-> now the new P-Vol), after resync, the status is PAIR again -> P-Vol now on the "secondary system".
The same to bring back the original P-Vol to the P-Vol state.
ESX-Hosts are fine, all paths are online again. Unfortunately, Hyper-V-Hosts (WITHOUT HDLM-Driver) crashed with the above method.
Could you help, what is wrong?