few times ago, we are busy and thinking about to configure some systems "HUS 150" with Hitachi Command Line.
At one point, we have some trouble with the coming up command; is there any possibilty to create one volume with the maximum capacity of one raid-group?
The following ones, creates a device with 10 KB from raid-group 010, stripesize 64.
HiCommandCLI -u system AddLogicalUnit serialnum=93053348 model=HUS150 groupnum=010 capacity="10" stripesize=64
My question, which parameter must be set to create one volume from mentioned raid-group with the maximum size?
Very thanks for your answers and advices in advance!