Profile

Mark Perino

Hitachi Vantara

Contact Details

Hitachi Vantara

My Content

1 to 13 of 13 total

RE: Newly installed Ops Center Probe Unable to Communicate with VSP F5200 Through Command Device

Posted By Mark Perino 06-24-2026 14:58
Found In Community: Block Storage \ view thread
HM 76 and HMO 76 have no connection to this. I would suggest to open a case with support.

RE: TUF upload issue

Posted By Mark Perino 06-24-2026 10:01
Found In Egroup: Block Storage \ view thread
There are 3 domains that you need to whitelite to enable access to upload files to TUF these are: tuf.hitachivantara.com tuf.hds.com tufportal.hitachivantara.com   All traffic to TUF is using SSL and Port 443.   ------------------------------ Mark Perino Hitachi Vantara ---------------------- ...

RE: Questions about integrating VSP with the Veeam BFSS plugin

Posted By Mark Perino 05-05-2026 11:05
Found In Egroup: Block Storage \ view thread
Your Linux example shows that sdf is only seen by one HBA. So when you re-installed with windows the same behavior occurs (The LDEV is only on one port/path).  It appears that you have only mapped LDEV 157 to port 4A, and not Port 3A. [root@localhost ~]# raidcom get ldev -ldev_id 157 -I3 LDEV: 157 SL: ...

RE: vsp one block 24 with proxmox

Posted By Mark Perino 04-29-2026 13:40
Found In Egroup: Block Storage \ view thread
Official Support for Proxmox is coming, and it will be listed in the Interop Matrix under OS. https://compatibility.hitachivantara.com/products/interop-matrix In the meantime if you are running it, contact your Account Team to submit an Interim Support Request. ------------------------------ Mark ...

RE: How to upgrade microcode on VSP 5000 Series

Posted By Mark Perino 04-29-2026 13:35
Found In Egroup: General Discussion \ view thread
Thanks Hadi, I sent you a private message with how to engage on this.  Certified and Trained Service Partners for each Array can do Microcode, and open cases for issues with Support.  ------------------------------ Mark Perino Hitachi Vantara ------------------------------

RE: PROD and UAT environment in E1090

Posted By Mark Perino 04-28-2026 12:15
Found In Egroup: Block Storage \ view thread
As Henrik mentioned, Resource Groups AKA VSM's are what you can use to accomplish this. The E Series Document for this is the System Administrator Guide for Virtual Storage Platform E Series: https://docs.hitachivantara.com/r/en-us/virtual-storage-platform-e-series/93-07-2x/mk-97hm85028/managing-use ...

RE: How to upgrade microcode on VSP 5000 Series

Posted By Mark Perino 04-28-2026 12:06
Found In Egroup: General Discussion \ view thread
Hello Hadi, Microcode upgrades are not done by customers.  The upgrades are done by Hitachi or an Authorized Service Partner.  Depending on your service contract, they may be done remotely by Remote Ops, or by a CE. ------------------------------ Mark Perino Hitachi Vantara ---------------------- ...

RE: Data port not coming Up on HITACHI VANTARA VSP G350

Posted By Mark Perino 04-02-2026 17:46
Found In Egroup: Block Storage \ view thread
Hello Vikrant, Two things: 1. Have you checked the FEC settings? This KB details how FEC needs to be set for the Cisco ports to link up. https://knowledge.hitachivantara.com/portal/app/portlets/results/viewsolution.jsp?solutionid=250404151723793 2. Are you using Hitachi Supplied SFP's?  3rd party SFP's ...

RE: How to hot add DBS2 disk shelf to VSP E 590

Posted By Mark Perino 03-18-2026 14:07
Found In Egroup: Block Storage \ view thread
Adding a Disk Tray is done by a CE or Authorized Service Provider.  To arrange hardware addition, you can open a support case. ------------------------------ Mark Perino Hitachi Vantara ------------------------------

RE: Documentation on adding second Drive tray to E590

Posted By Mark Perino 03-18-2026 14:05
Found In Egroup: Block Storage \ view thread
Hello Rich, Adding a disk tray is a non-customer procedure.  It would be performed by either Hitachi or an Authorized Reseller. Open a case with support and they can engage your local team.  ------------------------------ Mark Perino Hitachi Vantara ------------------------------

RE: VSP One Capacity question

Posted By Mark Perino 01-16-2026 11:17
Found In Community: Block Storage \ view thread
Some clarification here.  On the latest microcode, you do not NEED to perform this task using the command line or via REST API.  You can create a DDP Pool in the GUI. On B28 up to 2 DDP in the same Pool are supported. In RAID-6 Each DDP may contain up to 32 drives (which creates a max of 64 drives in ...

RE: Upgrade Microcode on VSP E1090

Posted By Mark Perino 01-15-2026 09:49
Found In Egroup: Block Storage \ view thread
In most cases Yes.  Once you open a case your local team will check and provide any restrictions regarding the upgrade.  There often are restrictions regarding downgrade, which depend on what features you are using. When downgrading, it may require special procedures to roll back.   ----- ...

RE: Upgrade Microcode on VSP E1090

Posted By Mark Perino 01-14-2026 08:35
Found In Egroup: Block Storage \ view thread
Hello Hadi, The Short answer is:  Open a Case, a Direct Upgrade is very likely. Regardless of the gap in versions a direct upgrade is usually supported.  The local support team doing your upgrade will need to review the ECNs and Tech Tips that apply to your environment before they perform the upgrade. ...