Meet our experts
Luu - You can perform a physical reset of the GUMs. At the back of each controller, there is a recessed button labeled LAN-RST. Use a paper clip to press it for a few seconds to reset the GUM. Regards, Dang ------------------------------ ...
Dang , thank you for replying to me. This storage system has only 1 failed harddrive , other than that , there is nothing wrong . I am still unable to login to the CTLs of this G700 system through Storage Advisor Embedded ...
Luu - Is the storage system 100% healthy in the Maintenance Utility (https://ip-of-ctl1-or-ctl2/MaintenanceUtility/)? You can try rebooting the GUMs while in the Maintenance Utility. Do one at a time and wait for 15 minutes or ...
I have a VSP G700 storage system , and i have encountered a problem that i don't know how to solve. Before i made changes to the SNMP Community String in the Maintenance Utility , i was still able to login and query data from ...
Because of too many drive failures that werent swapped out at the right time, the g1000 array is not usable at the moment. However, in the SVP, I cannot change from view mode to modify mode in order to do a drive swap. Would ...
INSPIRED THINKING
Read HV Insights. Fresh ideas and thinking on all things digital. Updated regularly.
BE A CUSTOMER ADVOCATE
Success stories inspire others. We’d welcome an opportunity to celebrate yours.
Discover communities to enrich your experience and learning opportunities.
Find others with whom you may seek advice and share common challenges.
Join in discussions with your peers and industry leaders to expand your knowledge.