Profile

Sven Kirsten

SVA System Vertrieb Alexander GmbH

Contact Details

SVA System Vertrieb Alexander GmbH

My Content

1 to 20 of 36 total

RE: External Volume as P-Vol for GAD

Posted By Sven Kirsten 03-17-2023 03:14
Found In Egroup: Flash Storage​ \ view thread
Hi Diana,  thank you for your response.  So from your answer I derivate that the OpsCenter Software and the HORCM should be able to use External Volume LDEVs as P-Vol in a GAD replication. There are no limitations.  To give you more Details:  VSP E-790 OpsCenter 10.9.1 And I would expect ...

External Volume as P-Vol for GAD

Posted By Sven Kirsten 03-16-2023 12:29
Found In Egroup: Flash Storage​ \ view thread
Hi guys, I try to use an External Volume as a P-Vol for a GAD Pair replication.  OpsCenter Administrator does not show the "External_Volume" in the Volume list under Storage/ /Volumes. I see it only in Storage/ /External Volumes.  Also I'm not able to start a HORCM instance, pointing to this LDEV ...

RE: No config & perfomance data in Analyser Detail View Server.

Posted By Sven Kirsten 03-14-2023 09:13
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi Jörg,  it seems it was running successful until 2023-03-11.  So the question here did you changed something in the background ?  A restart of the Detail View Server did you already triggered ?  [root@occs bin]# cd /usr/local/megha/bin/ [root@occs bin]# ./megha-jetty.sh status Megha server ...

Volume Migration - Volume Size

Posted By Sven Kirsten 03-12-2023 11:34
Found In Egroup: Hitachi Ops Center​ \ view thread
Hello,  last, I used "Volume Migration" in OpsCenter to migrate an ESX - Boot Volume from an older VSP to this newer one.  It works - but I saw the used capacity before and after.  In this exmaple, I migrated a volume with size of 10 GB and 60% used capacity.  After the OpsCenter "Volume Migration" ...

RE: Ops Administrator Error

Posted By Sven Kirsten 02-20-2023 09:55
Found In Community: Hitachi Ops Center​ \ view thread
Try to restart all the docker container, seems to be one of them hosting ElasticSearch is not up and running.  systemctl restart docker

RE: Express Installer Analyzer detail view issue

Posted By Sven Kirsten 02-14-2023 11:50
Found In Egroup: Hitachi Ops Center​ \ view thread
try to create a partion by hand - just an idea - not sure if it helps  ------------------------------ Sven Kirsten Systems Engineer SVA System Vertrieb Alexander GmbH ------------------------------

RE: Express Installer Analyzer detail view issue

Posted By Sven Kirsten 02-14-2023 10:47
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi Souvik,  yes - you are right. In the current Analyzer Installation and Configuration Guide - Page 85, its described what to do.  Regards Sven  Good luck Jörg ;-)  ------------------------------ Sven Kirsten Systems Engineer SVA System Vertrieb Alexander GmbH ----------------------------- ...

RE: How to ensure data consistency between PVOL and SVOL prior pairsplit?

Posted By Sven Kirsten 02-13-2023 10:43
Found In Community: Flash Storage​ \ view thread
Hi Abhishek,  when you want to have r/w on S-Vol after a DR-Test, means you want to simulate Powering-Off the P-Vol site ?  See : https://knowledge.hitachivantara.com/Documents/Management_Software/SVOS/9.8.5/Global-Active_Device/11_Planned_outage_of_global-active_device_storage_systems Section : Planned ...

GAD Cluster Link over IP Line

Posted By Sven Kirsten 02-09-2023 12:09
Found In Egroup: Flash Storage​ \ view thread
Hi there,  a customer don't have FibreChannel lines between the datcenter and he don't want to use iSCSI as GAD cluster connect protocol.  So what are the alternatives we have ?  Would it be possible to use a FC-over-IP Gateways/Bridges to encapsulate FC frames into IP packets ?  Regards Sven  ...

RE: Add Probe for VMWare - Error

Posted By Sven Kirsten 02-07-2023 03:36
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi William,  good shot - but the MOB service is up and running. I was able to login.  I've found this article : https://kb.vmware.com/s/article/81799 But I can't apply all this workaround, when starting JDK / SDK / JVM. For me it sounds like I need to start the OpsCenter Probe application in combination ...

Add Probe for VMWare - Error

Posted By Sven Kirsten 02-06-2023 10:07
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi,  I run into this error , when I tried to add a probe for VMWare vCenter.  Unable to connect to vCenter server.Client received SOAP Fault from server: Permission to perform this operation was denied. Please see the server log to find more detail regarding exact cause of the failure. VMWare Version ...

RE: Raidcom

Posted By Sven Kirsten 12-23-2022 10:03
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi Dhruv,  raidcom (Control and Command Interface - CCI) is a great toolset of Commands (for Linux and Windows) to do anything on your VSP systems.  Just some use-cases :  Create Parity Pools / LDEVs / Storage Pools / HostGroups Create GAD Volume Crate Snapshots and Volume Clones Configure for ...

RE: OpsCenter Protector is in an invalid state (Session_ID is not found in the header

Posted By Sven Kirsten 12-22-2022 19:25
Found In Egroup: Hitachi Ops Center​ \ view thread
Thanks Prasenjit  for your respnds.  In my case I've installed each product separatly.  So I was asked which Port I want to use for Protector.  ---------------------------------------------------------------------------- Please enter the HTTPS port for the application user interface User Interface ...

RE: OpsCenter Protector is in an invalid state (Session_ID is not found in the header

Posted By Sven Kirsten 12-22-2022 06:14
Found In Egroup: Hitachi Ops Center​ \ view thread
Thank you Prasenjit for your respnds. I understand you - but in the end - no matter which Port the customer is using - the error message I got from the Administrator while I want to link it to the Protector - lead me into a total wrong direction. A error messages like "On TCP Port 443 no Protector Service ...

RE: OpsCenter Protector is in an invalid state (Session_ID is not found in the header

Posted By Sven Kirsten 12-21-2022 13:57
Found In Egroup: Hitachi Ops Center​ \ view thread
Thank you very much - William We found the reason.  I just used the default TCP Port 443.  But the Protector runs on another Port.  But the error messages lead me into a total wrong direction.  Messages like "On TCP Port 443 no Protector Service is running. May be on Port 443 runs the Common Service ...

OpsCenter Protector is in an invalid state (Session_ID is not found in the header

Posted By Sven Kirsten 12-19-2022 06:07
Found In Egroup: Hitachi Ops Center​ \ view thread
We have new installed Administrator and Protector (newest version 10.9) And now we want to link the Administrator to the Protector. (So that the Administrator can communicate with the Protector) On the Protector we have applied the License keys and created already 2 Hitachi Block Storage Devices. ...

OpsCenter Protector is in an invalid state (Session_ID is not found in the header

Posted By Sven Kirsten 12-19-2022 06:06
Found In Library: Hitachi Ops Center​

SSL Certificate on HSAE ?

Posted By Sven Kirsten 11-29-2022 04:02
Found In Egroup: Flash Storage​ \ view thread
Hi guys,  a customer wants to load its own SSL certificate (that is signed by a CA) onto its HSAE. But I find no option on the HSAE GUI and there is no hint in the User Guide. It that right - this is not possible ?  Regards Sven ------------------------------ Sven Kirsten Systems Engineer SVA System ...

VSSO - What about ?

Posted By Sven Kirsten 11-04-2022 11:06
Found In Egroup: Hitachi Ops Center​ \ view thread
Hi,  VSSO - Virtual Storage Scale Out is an initiative to build a loosely coupled storage cluster. OpsCenter should have features to support this approach.  As I opened the OpsCenter Administrator Guide 10.9 and searched for VSSO, I found nothing.  So how will reflect this initiative in OpsCenter ...

Storage Advisor Embedded - No SERVERS

Posted By Sven Kirsten 10-10-2022 02:33
Found In Egroup: Flash Storage​ \ view thread
Hi folks,  I wondering in HSAE (Hitachi Stoprage Advisor Embedded) - I do not see the button "SERVERS" on the top left bar.  I have running not the oldest microcode version, normally I would expect to have it.  See attached screen shot.  Any ideas ?  regards Sven ------------------------------ Sven ...