Profile

Matt Muldoon

TD SYNNEX Germany GmbH & Co. OHG

Contact Details

TD SYNNEX Germany GmbH & Co. OHG

My Content

1 to 5 of 5 total
Posted By Matt Muldoon 05-26-2023 03:21
Found In Egroup: Flash Storage​
\ view thread
Hi again, remember to use the -l  (local) .. then you can address only the Svol or Pvol .. both storages do not have to be accessible to horcm. ------------------------------ Matt Muldoon Systems Engineer TD SYNNEX Germany GmbH & Co. OHG ------------------------------
Posted By Matt Muldoon 05-26-2023 03:19
Found In Egroup: Flash Storage​
\ view thread
Hallo Sven,  please post  raidcom get ldev -ldev id... for both p and s vols. But.. the pairsplit command will do it. To Split the pair removing the virtual_ldev_id from the SVOL.   pairsplit -g gad00 -RF -l -IH1. pairdisplay -g gad00 -fcex -IH0  svol is now smplx  and gad reserved. Now Split ...
Posted By Matt Muldoon 04-20-2023 08:21
Found In Egroup: Flash Storage​
\ view thread
Hi , This could be all wrong but here is how I see it. when you add that external volume,  it will show up as a external volume under the meta resource group. It will also now have a virtual ldev_id. It will not show up in Ops Center as a "Volume" but as a "External Volume"   To Map to a different ...
Posted By Matt Muldoon 12-13-2022 06:50
Found In Community: Hitachi Ops Center​
\ view thread
Hello, Is it possible to restrict / enable access to a Ops Center portal User, by source IP Address? in Ops Center? "Kann man im OPS-Center Berechtigungen für die Quelle des Zugriffs hinterlegen, also nur bestimmte IP-Adressen berechtigen?" Thanks! Matt
Posted By Matt Muldoon 10-20-2022 12:18
Found In Egroup: Data Protection
\ view thread
If you use CCI you can choose the external LUN ID and also the Internal LDEV ID as you would like it. In HSAe it will default to LUN ID 0  and also LDEV ID whatever is the lowest free LDEV ID. Add the discovered External Volume $ raidcom add external_grp -path_grp 1 -external_grp_id 1-1 -port CL1-C ...