Legacy HDS Forums

horcm files and LUSE volumes

Discussion created by Legacy HDS Forums on Sep 6, 2007

Originally posted by: SebaS



Hi,
I have a USP replicating (TC) to a 9980. I?m using CCI version 01-19-03/04 on Solaris 10.
I'd like to know if it's possible to state via CLI the progress or percentage of completion of the LDEVs inside the LUSE. What I mean is if the LUSE is comprised of 10 LDEVs and 5 of them are finished replicating, I'd like to see that number.
I can see it roughly on the TC Usage Monitor (as "Pair Synchronized %") but as it is a percentage it won't give me real numbers.
I tried adding all the LDEVs members of the LUSE to the horcm files (instead of only the first LDEV of the LUSE) but it shows me N times the same LDEV.
I'll try to clarify:
The output of pairdisplay (with "-g GRPX" or "-g GRPX -d dev1_xxx) is the same for this two configurations (horcm files):
A)
GRPX               dev1_00          22284     00:51            0
GRPX               dev1_001          22284     00:52            0
GRPX               dev1_002          22284     00:53            0

B)
GRPX               dev1_00          22284     00:51            0

For the config A) I issue the commands:
root@serverx:/etc> pairdisplay -g GRPX -d dev1_00 -fx
Group   PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M
GRPX     dev1_00(L)  (CL1-A-5, 0,   0)43396   91e.S-VOL PAIR ASYNC ,-----    51 -
GRPX     dev1_00®  (CL1-C-3, 8,   0)22284    51.P-VOL PAIR ASYNC ,43396   91e -

root@serverx:/etc> pairdisplay -g GRPX -d dev1_001 -fx
Group   PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M
GRPX     dev1_001(L) (CL1-A-5, 0,   0)43396   91e.S-VOL PAIR ASYNC ,-----    51 -
GRPX     dev1_001® (CL1-C-3, 8,   0)22284    51.P-VOL PAIR ASYNC ,43396   91e ?

root@serverx:/etc> pairdisplay -g GRPX -d dev1_002 -fx
Group   PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M
GRPX     dev1_002(L) (CL1-A-5, 0,   0)43396   91e.S-VOL PAIR ASYNC ,-----    51 -
GRPX     dev1_002® (CL1-C-3, 8,   0)22284    51.P-VOL PAIR ASYNC ,43396   91e -

For the config B):
root@serverx:/etc> pairdisplay -g GRPX -d dev1_00 -fx
Group   PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M
GRPX     dev1_00(L)  (CL1-A-5, 0,   0)43396   91e.S-VOL PAIR ASYNC ,-----    51 -
GRPX     dev1_00®  (CL1-C-3, 8,   0)22284    51.P-VOL PAIR ASYNC ,43396   91e -

If I'm not being clear ebough please let me know.
Thanks in advance for all the help.

Regards,
Sebastian.-

Outcomes