Legacy HDS Forums

unable to create pair

Discussion created by Legacy HDS Forums on Feb 4, 2012
Latest reply on Apr 5, 2014 by Raja Pamuluri

Originally posted by: medo



Im unable to create a pair in the usp via horcm.
paircreate -ITC0 -g mmsdg -vl -fg async 10 -jp 10 -js 10
paircreate: [EX_CMDRJE] An order to the control/command device was rejected
Refer to the command log(/HORCM/log0/horcc_rchbak001.log) for details.
It was rejected due to SKEY=0x05, ASC=0x26, SSB=0xB9E0,0xB912 on Serial#(48168)


log suggusts the following

CMDLINE : paircreate -ITC0 -g mmsdg -vl -fg async 10 -jp 10 -js 10
10:31:42-b9499-17990- ERROR:cm_sndrcv[rc<0 from HORCM]
10:31:42-b96d8-17990- [paircreate] L_CMD(CREATEPAIR) ERROR :rc = -35
10:31:42-b979a-17990- [paircreate][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error lo
gs(HORCM_LOG=/HORCM/log0/curlog) and Remote HORCM logs,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.


i have done the above. no luck

Outcomes